Stainless Steel Filler Rods - 316LSi

Corrosion resistant, chromium-nickel-molybdenum rods for welding of austenitic stainless alloys. The alloy has very good resistance against corrosion in acid and chlorinated environments and also a low carbon content which makes it particularly recommended where there is a risk of intergranular corrosion.
Rod length: 1 metre
Pack weight: 5kg.

Process & Heating Nozzles

700mm bent neck for propane nozzles.

Bent Neck

SIP Hi-Tech ARC Inverter Welders

With anti-stick circuit to ensure a stable arc whilst maintaining optimised welding parameters. Ideal for a wide range of applications, including fabrication, general and auto repairs, agricultural repairs and on-site welding. Superb build quality and extremely easy to use, but with an exceptionally high duty cycle. These models are complete with electrode holder, 3m cable and 3m earth lead. They are also covered by 2 year warranty. All of these models are generator friendly.

Weldmate P175DV ARC Inverter Welder

05152
Dual voltage: 230v (13amp)/110v (20amp) supply.
140amp/100amp @ 60% duty cycle.
10-140amp current range.
1.6-3.25mm rod diameter.
Complete with carry case.
Weight: 8.4kg.

Combination Bottle Spanner

Fits regulators, hoses, flashback arrestors and bottle valves. Drop forged.

MasterGage Weld Gauges

MasterGage permits quick and accurate measuring of the most popular weld fillet sizes in inch and metric. Excellent for checking alignment and inspection of various angles of welds. High quality stainless steel (SUS 304) blades to resist rust and for longer life. Blades are deburred for fine and smooth edges. All sizes and numerals are laser etched into the surface for clarity and easier reading. Comes in a handy vinyl pocket case with snap lock.

MG-11 Weld Fillet Gauge

Permits quick and accurate measuring of the most popular weld fillet sizes in inch: 1/8" - 1" and metric: 3.2 - 25.4mm. All sizes and numerals are laser etched into the surface for clarity and easier reading. MasterGage welding gauges are intended for general dimensional inspection of welded fabrications where close tolerances are not expected.

Soldering Iron Kit

Convenient, hand-held soldering iron, powered by a gas canister in the handle. The handle is ergonomically designed for comfort and has an automatic piezo ignition button with a gas control valve. Anti-flare enables the tool to work in all positions (360 degrees). Comes complete with a deluxe metal carrying case.

Kit contents:
1x PSI 3380 soldering iron
2x gas cartridges
1x Copper tip (700250)
2x Jet Orifices
1x Carrying Case

Binzel Mig Torch Accessories

003.0013 NOZZLE SPRING MB25

Murex Lightweight Swaged Welding Nozzles

For use with DH lightweight shank and welding mixer, above. Plate thickness refers to mild steel.
A range of 9 types, for use with DH lightweight shank and welding mixer.

Plate thickness (mild steel):
No.1 0.9mm.
No.2 1.2mm.
No.3 2.0mm.
No.5 2.6mm.
No.7 3.2mm.
No.10 4.0mm.
No.13 5.0mm.
No.18 6.5mm.
No.25 8.2mm.

Cylinder Adaptors for Side Entry Cylinders

Threaded female one end to connect to a regulator and male on the other end to fit into the gas cylinder. Suitable for side entry cylinders such as Air Products etc.

Cylinder Adaptor 90° Right Hand

Murex Lightweight Swaged Welding Nozzles

For use with DH lightweight shank and welding mixer, above. Plate thickness refers to mild steel.
A range of 9 types, for use with DH lightweight shank and welding mixer.

Plate thickness (mild steel):
No.1 0.9mm.
No.2 1.2mm.
No.3 2.0mm.
No.5 2.6mm.
No.7 3.2mm.
No.10 4.0mm.
No.13 5.0mm.
No.18 6.5mm.
No.25 8.2mm.