Aluminium Tig/Gas Welding Rods

BS 2901 : Part 2 : 1990 18/8/3 Mo - 316L AWS A/SFA 5-9-93.
Low carbon austenitic filler rod for welding steels of similar composition (19% Cr, 12% Ni, 3% Mo). Use with argon shielding gas or argon/5% hydrogen.

Sifsteel Stainless 316L

Murex Tungsten Electrodes

Murex Tungsten Electrodes are available in three types: Thoriated (1.6mm), Ceriated (1.6 and 2.4mm) or Zirconiated (1.6mm, 2.4mm and 3.2mm). Packs of 10.

2% Thoriated, Colour Coded Red

Designed for DC (Neg) or straight polarity use. Maintain a sharp tip configuration during welding. Suitable for use with steels, nickel alloys and most alloys other than aluminium and magnesium. Not for AC welding.

No.1263 3/8" BSP Two way outlet valve

The No.1263 two way outlet valve from Bullfinch has a 3/8" BSP - LH female union with two 4.8mm hose ends. Needle valves on each outlet. Gives two outlets off a Bijou regulator.

Cemont Type 9V TIG Torch

For use with power source model number S1400 illustrated.

Oxygen Regulators

Designed with 2 gauges to indicate cylinder
contents and outlet pressure.

4.0 Bar Oxygen Regulator
Full 300 bar capacity.
10.0 Bar Oxygen Regulator
Full 300 bar capacity.

Bottom entry
design, which
is suited for
top outlet
cylinder valves.
Fitted with 1/4?
parallel threaded
gauges,
standard
3/8? BSP
outlet and
5/8? BSP inlet
connections.

Primus 2000 Cylinder Accessories

Regulator with knurled valve control.

SWP Drying Ovens

SWP drying ovens - the efficiency of welding electrodes can be seriously impaired if the electrode coating is exposed to a damp environment. Dampness can cause water to be generated in the arc shield, which could adversely effect the running quality of the electrode by promoting excessive spatter and ultimately the quality of the weld by creating porosity and piping. SWP offer you a range of drying ovens to suit many locations and needs.

1122 Dual Voltage 110/240V Portable Drying Oven (100C-300C)

The portable drying oven is designed to operate in rugged site conditions, thermostatically controlled over a temperature range of 100 - 300C.
Voltage: 110/240V (dual).
Load: 300W.
Dimensions (W x D x H):
Internal: 115 x 480 x 115mm.
External: 175 x 610 x 210mm.
Oven capacity: 13.6kg.
Oven weight: 10kg.

Panther EMW-120 Dual MIG Welder

A high power single phase welder that operates from a standard 240V household outlet. Heavy-duty transformer and turbo fan cooling allows welding at higher power for longer periods. Automatic wire speed control with manual overide. Professional torch with trigger-controlled power and gas prevents undesired arcing and gas wastage. Low current performance - Able to deliver a 50A minimum output for welding thin material easily. Variable wire spool size capability - Accepts both 0.7kg and 5kg spools for maximum portability and economy. Heavy duty redesigned case for durability combined with low weight and portability. Can be used for flux (no gas) and Mig/Mag (gas) welding. Four position, stepped voltage regulator allows process selection to be pre-set. Safety features include fan cooling and thermal protection. Supplied complete with a smooth action, twin roller feed unit, accessories, integrated carrying handle and 2m mains cable. Ready to use and fully portable. Suitable for automotive, farm, maintenance and contractor use. 2 year warranty. Conforms to TUV-GS, GOST, EMC, LVD and all relevant CE requirements. Insulation class H. Protection degree IP21.

Input voltage: 230V, 50/60Hz.
Fuse rating: 10A.
Phase: 1.
Power consumption: 3.6kW max. (1.3kW60%).
Output current range: 50A - 120A (DC).
Open circuit voltage: 30V.
Dimensions: (L x W x H) 480 x 275 x 380mm.

MIG Welder

Binzel Mig Torch Accessories

Also compatible with Parweld torches.

Contact Tips

Spare Cover Lenses

Lenses to suit Parweld Large view welding and grinding helmet.