Kennedy® Huntington Type Wheel Dressers

With improved quick release cutter wheel design which reduces down-time when changing wheels. Ergonomically designed cast iron handle and case hardened, polished cutters. Suitable for cleaning, sharpening and truing grinding wheels.

Low Speed Grinder

Heavy duty die grinders with high power motor. Suitable for grinding and facing work using brushes, flaps, discs and points. Improved tool life due to the "Super Joint System - SJS", absorbs the shocks created by accidental wheel lock during operation to protect gear, collet and coupling for longer tool life. Power input: 750W. Collet Size: 8mm or 1/4". No load speed: 1,800 - 7,000rpm.

GD0810C

180mm (7") 2300W Angle Grinder

Powerful 2,300W motor with dust proof ball bearing portion and durable retainer. New contruction to protect against grease leakage. Paddle switch (lock-on/lock-off) style. Sliding trigger (dead man's switch) style. With spindle lock 3-position side handle and tool-less angle adjustment of the disc guard.

Specifications:
Power input: 2,300W.
No load speed: 8,500rpm.
Wheel diameter: 180mm.
Hole diameter: 22mm.
Spindle thread: M14 x 2.
Weight: 5.2kg.

Supplied with pin spanner, side handle and grinding disc.

G18SE3-VIB

Bosch Jigsaw Blades

Application: Stainless steel. Straight cuts in steel, non-ferrous metals 2-5mm. Stainless steel 2-4mm. Tungsten carbide teeth. Effective length: 50mm. Pitch: 1.4.

Hard Metal Carbide Tipped For Special Applications (Pack 3)

York? Drum Holders

Suitable for use with chucks/collets on all portable power and air tools. For use with spiral bound abrasive sanding bands. Self expanding when in use for a secure grip on the band. All shanks are 6mm except where marked * which has an 8mm shank.

Kennedy® Jigsaw Blades

Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting in some metals lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw baseplate reducing the gap around the blade and reducing the splinter area. Another technique is to score a guide line on the wood creating a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.

?U? Type Suitable for Black & Decker and Hitachi DIY. HSS - Medium Duty (Pack 5)

Capacity: Wood - 20.0mm, Plastics - 20.0mm. Tooth pitch: 2.5. Effective length: 60mm. For cutting curves. Wavy set teeth. Equivalent to B&D A5033.

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Plain End

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Felt Flap Wheels

York Felt Flap Wheels are made of pure wool in a variety of sizes and shapes. The mandrels are exactly centred for true-running operation. Suitable for product finishing/polishing with finishing/polishing compounds.

3M 255P Hookit™ Discs

Finishing product coated onto a film backing for consistent finishing. Aluminium oxide with an anti-load coating.

Hole Pattern: 600A. 6 Hole.

Diameter: 150mm.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 6mm

Shape W220. Grade: RA46. Diameter: 25mm. Length: 25mm. Max. rpm: 25,000. Weight per 10: 100g.