York High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Zirconium Grade Glass Fibre Backed (For Stainless Steel - Non-Scratch).

180mm Dia x 22mm Bore 8,600 MOS (rpm).

3M 777F/707E File Belts

For grinding stainless, nickel alloy and titanium. 3M material bonded to a tough cloth backing. Incorporate a grinding aid to ensure long life and high cut rates on all metals. Can be used to blend scratches left by coated abrasive belts.



100mm Wide x 289mm Long.

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Aluminium Oxide Grade Aluminium Backed (General-Purpose)

100mm Dia x 16mm Bore 15,300 MOS (rpm).

Norton Straight Wheels For Surface Grinding

AVS: Aluminium oxide abrasive used on all ferrous materials including mild steel, carbon steels and wrought irons. CVS: Silicon catbide abrasive used on non-ferrous materials that includes copper, aluminium, stone and cemented carbides. 38A: Sharp, friable aluminium oxide abrasive used for grinding hard, heat sensitive steels. Well suited for cylindrical, surface and internal applications.



(Type 1) In a choice of Medium or Soft.

3M Abrasive Utility Cloths and Sheets

314D
Aluminum oxide abrasive product rolls and sheets constructed on a J weight, durable cloth backing. For use in metalworking.

Rolls

Norton Straight Wheels For Surface Grinding

AVS: Aluminium oxide abrasive used on all ferrous materials including mild steel, carbon steels and wrought irons. CVS: Silicon catbide abrasive used on non-ferrous materials that includes copper, aluminium, stone and cemented carbides. 38A: Sharp, friable aluminium oxide abrasive used for grinding hard, heat sensitive steels. Well suited for cylindrical, surface and internal applications.



(Type 1) In a choice of Medium or Soft.

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Oval Shape

Cut 3 - Rapid Cut
For use on softer non-ferrous and plastic materials i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.

Paslode Nail/Fuel Packs

To be used with Paslode IM350+ 90mm Gas Framing Nailer.

Kennedy® Sharpening Stones

Silicon Carbide man-made abrasive with very hard, sharp particles. This makes it ideal for non-ferrous metals, hard surfaces, alloys and cemented carbides. Also used on stone, marble, glass and plastics. A superior abrasive that is able to penetrate and cut quickly with only light pressure being applied.

Square Silicon Carbide

A range of tough general-purpose sharpening stones able to give keen, even cutting edges on all straight edge cutting tools. Consistent and uniform cutting edges ensure fast cutting and longer tool life.

Hitachi KC18DKL/JA 2 Pce 18V Cordless Kit with 4.0Ah Li-Ion Batteries

Standard accessories:
2 x BSL1840 high capacity 4.0Ah Li-Ion batteries.
UC18YRSL charger.
Side handle.
Driver bit.
Carrying case.

Model: DV18DSDL/JW.
Charge time: 60min.
No-load speed: High: 0-1800/min. Low: 0-400/min.
Impact rate: High: 0-27000/min. Low: 0-6000/min.
Max torque: 92Nm.
Drilling capacity: Brick 16mm. Wood 65mm. Metal 13mm.
Overall length: 235mm.
Weight: 2.2kg.

Model: WH18DSAL/JW.
Charge time: 60min.
No-load speed: 0-2600/min.
Max torque: 145Nm.
Capacity (bolt): M6-M14.
Overall length: 166mm.
Weight: 1.7kg.