Dronco Diamond Cutting Blades

Dry cutting diamond disc which is sintered and segmented designed to cut construction-site materials with a good price/performance ratio. For use on all kinds of construction site material.

ST7 Diamond Cutting Discs

Paslode IM350+ 90mm Gas Framing Nailer 6V

The Paslode IM350+ has new technology which provides increased reliability and extended service intervals. Features a new nose design for improved grip and a dual action rafter and belt hook. Suitable for first fix timber to timber applications.

Fires 50-90mm nails.
Up to 180 fasteners/min.
Sequential trigger action.
Reload indicator/open view magazine.
Fine depth adjustment.
Soft-grip handle.

Contents:
IM350+, 2 x 1.2Ah Ni-Cd batteries, battery charger, cleaning solution, lubricant, safety glasses to EN 166:F, allen key, instruction manual and carry case.

Specifications:
Rear-loading angled magazine. Capacity 55 nails. Up to 1100 fastenings per fuel cell, 4000 per battery charge. Weight 3.4kg.

3M Abrasive Utility Cloths and Sheets

314D
Aluminum oxide abrasive product rolls and sheets constructed on a J weight, durable cloth backing. For use in metalworking.

Rolls

York? Felt Bobs

York Felt Bobs are made of pure wool in a variety of sizes, shapes. The mandrels are exactly centered for true-running operation. Suitable for product finishing/polishing with finishing/polishing compounds.

Plain End Cylinder (Bob)

Kennedy® Depressed Centre and Flat Reinforced Grinding Discs

All Kennedy Depressed Centre and Flat Reinforced Cutting wheels now carry the "oSa" (The Organisation for the Safety of Abrasives) mark of approval. "oSa" is an association of the world's leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. "oSa" marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

Type 27 Depressed Centre Grinding

For use with all portable angle grinders. Not to be used for wet grinding. Optimum angle for use 25° to 35°. Grade A30/AS30 - for general purpose use on metals. INOX - for use on Stainless steel (iron, chlorine and sulphur free).

Trend Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

1/4" and 1/2" Shanks

Rotabroach Mini Cutters

For perfect holes in sheet metal, pipes & plastic. Cut clean, burr-free holes in seconds with new Roatabroach Mini-Cutters, the professional solution to holemaking in sheet metal, pipes and plastics. Mini-Cutters produce holes by removing a 'disc' of metal and have precision ground teeth and flutes to rapidly remove waste material, so they are fast, smooth and highly accurate. Now they come with a new and more aggressive tooth geometry to give high higher performance and longer cutting life on stainless steel and other difficult materials. No toolbox is complete without Mini-Cutters for clean, precise and effortless holecutting every time. Over 3 times faster than twist drills Mini-Cutters have multiple teeth and an annular
cutting action with no 'dead centre' area as with a twist drill. It means that less pressure is required to make the hole, so there is less risk of deforming sheet metal. This highly efficient cutting action also ensures minimal burring on breakthrough, reducing or completely eliminating the need for additional finishing work. Last up to 300 times longer than hole saws Holesaws have stamped teeth which only remove
small particles of metal with each revolution whereas Mini-Cutters are precision ground cutting instruments which slice their way through sheet metal without leaving burrs or jagged edges. Because they are made from M2 High Speed Steel,
they retain their sharpness to give a longer, more reliable cutting life over thousands of holes.

Hitachi NiMh Batteries

Much higher potential capacity than NiCad. Require less conditioning than NiCad. Less toxic than NiCad.

EB2430 Battery 24V 3.0AH NiMH

Charger compatibility: UC18YRL/J0, UC24FYA.
N.B. Picture is for illustrative purposes only. Actual product may vary in appearance.

York Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Round Tree

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Kennedy® Power Tool Chisels

Suitable for tools with SDS Max system.