York Grinding Wheels

Vitrified bond for precision grinding. Unaffected by water, acid and oils. All 1,1/4?? bore, supplied with 1??, 7/8??, 3/4??, 5/8?? & 1/2?? bore nylon bushes. Tough general-purpose aluminium oxide which is hard wearing. Used for surface and off hand grinding. Refined aluminium oxide with a faster grinding operation. Suitable for high speed steels, precision grinding and general surface grinding. Silicon carbide, used on low tensile strength materials, non ferrous metals and carbide tool grinding. All York grinding wheels are supplied in a unique storage box, which helps prevent chipping and other accidental damage. Spare cases available on request.

1,1/4" Bore

York? Spare Storage Box

Note: Grinding wheel not supplied.

DeWalt 235mm Circular Saw

D23700
High power, durable motor delivers excellent power even at maximum depth of cut. Optimum balance for safe, fatigue-free operation. Additional handle for safe two-handed work. Steel shoe for added durability. Stable block construction for low vibration running and long service life. Protection hood for sawdust extraction. Spindle lock for ease of blade change. Variable adjustment of the mitre angle to 45° for added versatility.

Specifications:
Power input: 1750W.
Power output: 960W.
No load speed: 4700rpm.
Blade diameter: 235mm.
Blade bore: 30mm.
Bevel capacity: 45°.
Max. depth of cut at 90°: 86mm.
Max. depth of cut at 90°: [with guide rails] N/A mm.
Max. depth of cut at 45°: 62mm.
Max. depth of cut at 45°: [with guide rails] N/A mm.
Weight: 8.2kg.
Length: 430mm.
Height: 290mm.
Supplied with: 24 tooth precision saw blade, rip fence and blade spanner.

Available in 230V and 110V.

Hermes? Silicone Carbide Abrasive Sheets

Flexible silicon carbide paper for finishing wood, paint, lacquer and plastic. Size: (W)230mm x (L)280mm. Available in several grades.

Garryson Flap Discs

Suitable for a wide range of materials and applications, offering consistant grinding and finishing performance, long life compared to resin fibre discs and reduced vibration and noise compared to depressed centre grinding discs.

Standard Density - Aluminium Oxide Flap Discs

Ideal for use on non-ferrous metals, such as aluminium or brass and on ferrous metals where glazing of zirconium discs is a problem. Aluminum Oxide produces a slightly finer finish than a zirconium disc of the same grit.
Disc Diameter: 115mm.
For general use.

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Zirconium Grade Glass Fibre Backed (For Stainless Steel - Non-Scratch).

100mm Dia x 16mm Bore 15,300 MOS (rpm).

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Ball Nosed

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

SDS Plus Rotary Hammer Drill

Power output: 430W.
No load speed: 0 - 1500rpm.
Impact at rated speed: 0 - 4850ipm.
Single impact force: 1.7J.
Max. drilling range: steel 13mm, concrete 18mm, wood 30mm.
Weight: 2.9kg.

GBH 36-VLICP KCA

Supplied with 1x 2.6Ah + 1x 1.3Ah Lithium Ion batteries

Kennedy® Sharpening Stones

Silicon Carbide man-made abrasive with very hard, sharp particles. This makes it ideal for non-ferrous metals, hard surfaces, alloys and cemented carbides. Also used on stone, marble, glass and plastics. A superior abrasive that is able to penetrate and cut quickly with only light pressure being applied.

Square Silicon Carbide

A range of tough general-purpose sharpening stones able to give keen, even cutting edges on all straight edge cutting tools. Consistent and uniform cutting edges ensure fast cutting and longer tool life.

PCL Extension Nozzle

Suitable for use with both standard and plastic blow guns.