Felt Flap Wheels

York Felt Flap Wheels are made of pure wool in a variety of sizes and shapes. The mandrels are exactly centred for true-running operation. Suitable for product finishing/polishing with finishing/polishing compounds.

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Plain End

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Kennedy® Router Cutters

To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.

Two Flute Rounding Over Bits

Bosch Sabre Saw Blades

Bi-metal, side set, milled teeth. For pallet repair, wood with nails/metal (100mm), metal plates, pipes, aluminium profiles (3 - 12mm).
Effective length: 100mm.
Pitch: 4.0.
Product No. S922HF.

For Wood, Metal & Plastics (Pack 5)

SIP® Trade 2010FS Submersible Pump

06813
Portable and tough, this submersible pump, complete with float switch, is ideal for a wide variety of commercial and domestic pumping applications.

Specifications:
Supply: 230v (13amp).
Motor: 400w.
Float switch: yes.
Max. pumping head: 8M.
Flow rate: 150 l/min.
Max. particle dia: 5mm.
Cable length: 10M.
Weight: 4.7kg.

Engis Cones

Spindle diameter: 1/8" except* 1/4". 3mm shank available on request.

Softwood Cone

Manufactured from selected soft pine for pre-finish before final felt polishing.

Norton Abrasives

Advanced grain and bond system for longer life and quicker cutting. Suitable for steel and stainless steel applications. Free from iron, sulphur and chloride. For use with portable angle grinders. Type 41 (flat).

Type 41 Ultra Thin Cut Off Discs

York Grinding Wheels

Vitrified bond for precision grinding. Unaffected by water, acid and oils. All 1,1/4" bore, supplied with 1", 7/8", 3/4", 5/8" & 1/2" bore nylon bushes. Tough general-purpose aluminium oxide which is hard wearing. Used for surface and off hand grinding. Refined aluminium oxide with a faster grinding operation. Suitable for high speed steels, precision grinding and general surface grinding. Silicon carbide, used on low tensile strength materials, non ferrous metals and carbide tool grinding. All York grinding wheels are supplied in a unique storage box, which helps prevent chipping and other accidental damage. Spare cases available on request.

3" Bore

Norton Abrasives

Advanced grain and bond system for longer life and quicker cutting. Suitable for steel and stainless steel applications. Free from iron, sulphur and chloride. For use with portable angle grinders. Type 41 (flat).

Type 41 Ultra Thin Cut Off Discs

Kennedy® Aluminium Oxide Cloth

Superflex Aluminium Oxide is resin bonded over resin on a very flexible J-weight blue twill cloth. Moisture resistant and electrostatically coated for polishing flat and contoured surfaces of most materials.

Rolls

Roll size: (W)38mm x (L)50 Metres. Available in several grades.