York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

3mm Shank

30mm Dia x 10mm Height 20,400 MOS (rpm)

Engis Bobs

Spindle diameter: 1/8" except* 1/4". 3mm shank available on request.

Felt Bob

Manufactured from pure wool in a broad variety of sizes, shapes, and degrees of hardness - for any finishing requirement. The mandrels are exactly centered for true-running operation.

Kennedy® Linisher Belts

Resin Bond Aluminium Oxide Sanding Belts are designed for industrial applications. Durability combined with flexibility ensures a long life and first class performance. Suitable for wood and metal work.



25mm (1") Wide x 1065mm (42") Long.

York? File Belts

Suitable for a wide range of power tools. Aluminum oxide designed for a wide range of materials including metal, steel, aluminium and non-ferrous metals.



12mm Wide x 420mm Long.

Kennedy® Depressed Centre and Flat Reinforced Grinding Discs

All Kennedy Depressed Centre and Flat Reinforced Cutting wheels now carry the "oSa" (The Organisation for the Safety of Abrasives) mark of approval. "oSa" is an association of the world's leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. "oSa" marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

Type 41 Flat Reinforced Cutting

For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatability. Not to be used for wet cutting.
Grade A24 - For general purpose cutting on metals.
Grade C24 - For general purpose cutting on stone.

York? Open Type Polishing Mops

Designed specifically for use on plastics but is also suitable for gold and silver. This very soft material is unsuitable for steel, stainless and non-ferrous metals. Its open type construction performs well with a medium pressure and our synthetic gloss polishing bars.

Extra Soft

Air Tool Chisels with 0.401" Shank

For All Brands of Portable Air Chisels including CP, Desoutter, Kobe, Toku and YK.

Norton Aluminium Oxide Sheets

In the same market-leading material as Norton's "Handy Roll", these high quality aluminium oxide sheets provide excellent flexibility. Ideal replacement for "Emery Cloth."

Sheets

Sheet size: (W)230mm x (L)280mm. Available in several grades.

Kennedy® Extension Cables for Site Use

Waterproof spring loaded socket caps. Available as 1.5mm2 core cables rated to 16A over six hours and 2.5mm2 core cables rated to 32A over six hours (except KEN-282-2400K, rated at 16A). Plugs and sockets conform to BS 4343 : 1968.

110V 2.5mm Core

York? Sanding Bands

Spiral wound with tear resistant backing fabric. For grinding and finishing edges, profiles, welded joints etc. For use with power tools. Aluminium Oxide for use on most metals. Available in several sizes.

Aluminium Oxide Sanding Bands

Size: (Dia)15mm x (W)10mm.