Drill/Driver with LED


Keyless hex 1/4” chuck with Auto-Lock for fast changes. Intelligent 3-stage charge level indicator, Forward/reverse
operation. LED PowerLight, softgrip, variable speed.

Supplied with charger, 2x batteries, 10 screwdriver bits, 3 and 5mm hex drill bits, magnetic extension and case.
Idle speed: 0 - 400/1,250rpm.
Max. torque:(soft/hard) 22/36Nm.
Torque settings: 25 1.
Screw diameter: up to 8mm.
Capacities: steel 10mm, wood 35mm.

York? Nylon Interleaved Wheels

Made from high quality nylon, which is both flexible, durable and does not clog as easily as standard abrasive. 6mm shank diameter. Alternate flaps of abrasive and interleaved with a versatile high quality nylon. Ideal for: matching/blending a finish, light deburring, decorative/cosmetic applications, on most materials, rust removal and blending. Available in a choice of Coarse, Medium, Fine and Very Fine Density Grades and in sizes 50 x 25mm, 50 x 50mm, 76 x 50mm and 100 x 50mm.

Nylon Interleaved Wheel 100 x 50mm

Suitable for: Deburring, producing cosmetic finishes on most materials, rust removal, blending.

3M Red Paper Rolls

A very open coat "F" weight paper roll designed to minimize loading when used to sand soft resinous woods. Dimensions: (W)115mm x (L)50M. Several grades available.

PCL Airforce Tyre Inflators

Robust, lightweight handheld mechanical tyre inflator with a user-friendly dial display that offers fast, trouble-free tyre inflation. Suitable for tyreshops, garages, car dealers and transport depots. Clear dial display. Modern, lightweight and shock resistant construction. Proven Bourdon Tube with beryllium copper construction for robustness and high shock resistance. Direct valve design increasing inflation and deflation rates. Individually tested and certified. Built-in swivel and hanging device. Reduced operating costs - fast inflation and deflation rates. Increased customer service - high levels of speed, accuracy and safety. Reduced cost of ownership - long product life. High versatility - flexible usage. Guaranteed accuracy - individual testing, exceeds EC Directive 86/217/EEC Compliance - complies to BS EN 12645:1999.

Norton Aluminium Oxide Sheets

In the same market-leading material as Norton's "Handy Roll", these high quality aluminium oxide sheets provide excellent flexibility. Ideal replacement for "Emery Cloth."

Sheets

Sheet size: (W)230mm x (L)280mm. Available in several grades.

York High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Zirconium Grade Glass Fibre Backed (For Stainless Steel - Non-Scratch).

127mm Dia x 22mm Bore 12,000 MOS (rpm).

Nail/Fuel Packs - IM90i

Each pack contains nails and fuel cells, see table below.

York? Clean "n Strip Unitised Surface Cleaner

High stock removal producing a very good finish. Cleans surfaces faster and more effectively than wire brushes, scrapers or pickling pastes. As there is no metal components used in the manufacture of these high strength cool cutting discs, accidental damage to the work piece is eliminated. Suitable for grinding right into corners, across contours and in hard to reach areas. Ideally suitable for preparation and cleaning of welds, rust removal and removal of discolouration.

Unitised Discs

Requires M14 Backing Pad supplied separately: YRK-245-3510K.

3M Scotch-Brite? Shaft Mounted Flap Brushes

For uniform surfaces on workpieces without chatter marks. Fine, matt scratch pattern. Will produce a finer finish than a Combi Wheel. Applications: Light deburring; cleaning and finishing; discolouration and oxidisation removal from weld seams. Materials: -All metals. Dimensions: 75 x 45 x 6mm. Max speed 8500rpm.

Shaft Mounted Flap Brush FF-ZS

Grey Grade AFIN

Hammer Drill

Powerful 36 Volt combination tool for heavy duty hammer drilling and screwdriving applications.

Power output: 750W.
Max impact rate: 27,200bpm.
No load speeds: 0 - 400/0 - 1200/0 - 1600.
Battery capacity: 2.0Ah.
Drilling capacities: steel 13mm, masonry 16mm, wood 50mm.