3M Whetstone

Professional Diamond Whetstones will give you a perfect edge on all your blades and tools. Used for precision faceting, sharpening chisels, blades, carbide tools, etc.

Diamond Whetstone

Bosch Jigsaw Blades

Application: Soft ceramic wall tiles, glass fibre reinforced plastics, cast iron (5-10 mm), fine cut. Tungsten carbide coated. Effective length: 59mm. 50 grit.

Hard Metal Carbide Tipped For Special Applications (Pack 3)

Bosch® GST 90BE Professional Jigsaw

GST 90BE
The reliable partner for day-to-day use. High level of convenience with Bosch 'SDS' for easy, tool-free saw blade changes. Powerful 650-watt motor for fast work progress. Improved saw blade clamping system for high cutting precision. Bend-resistant steel sole plate. Exemplary running smoothness when sawing, which ensures best results and low-fatigue working. 4-stage pendulum action for tear-free cuts. Control electronics for material-specific working. Dust blowing function enables a clear view, and can be switched off for effective dust extraction.

Specifications:
Rated power input: 650W.
No-load stroke rate: 500-3100spm.
Weight: 2.6kg.
Cable length: 2.5M.
Stroke height: 26mm.
Cutting depth: wood 90mm, aluminium 20mm, non-alloyed steel 10mm.

Available in 240V and 110V.

Numatic International Hazardous Dust Vacuum Cleaner

All steel hazardous dust extraction vacuum. Quiet specification power pead. Full accessory kit. Fully tested and certified.

Accessories kit supplied BB17:
NVB 2B 2.5m vacuum hose.
NVB 23B Stainless steel gulper/scraper tool.
NVB 57B 65mm round dusting brush.
NVB 60B 305mm ABS crevice tool.
NVB 61B 152mm rubber brush. NVM 1BC 10 x disposable paper dust bags.
NVM 15B spare permatex filter.
NVM 50B 10 x polythene waste disposal bags.
Power: 1000W.
Airflow: 43.5 litres/sec.
Suction: 2450mm.
Capacity: 8 Litres.
Cleaning Range: 23.2 Metres.

HZQ 250

York Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.
N.B. - 3mm Shank

Oval Shape

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Kennedy® Router Cutters

With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.

Two Flute Flush Trimming Bits

338U Plain Stikit™ Sheets

Abrasive C paper backed sheets with a special self adhesive system that ensures the product remains firmly in place whilst in use but is easy to apply and quick to remove. Ideal for intermediate and final sanding on lacquered hard and soft woods, paints lacquers, primers, solid surface materials and plastics.



Plain (no holes)

Kennedy® Sharpening Stones

Silicon Carbide man-made abrasive with very hard, sharp particles. This makes it ideal for non-ferrous metals, hard surfaces, alloys and cemented carbides. Also used on stone, marble, glass and plastics. A superior abrasive that is able to penetrate and cut quickly with only light pressure being applied.

Square Silicon Carbide

A range of tough general-purpose sharpening stones able to give keen, even cutting edges on all straight edge cutting tools. Consistent and uniform cutting edges ensure fast cutting and longer tool life.

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Engis Hyprez Oilstones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Hyprez E.D.M. Hard/Aluminium Oxide

Rectangle. Specially formulated for EDM scale removal. Length: 150mm.