York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Zirconium Grade Aluminium Backed (For Stainless Steel)

100mm Dia x 16mm Bore 15,300 MOS (rpm).

Kennedy® Buffing & Polishing Foams

Ultra soft reticulated foam for final polishing/finishing. Designed to allow free flow of air.

Red Final Polishing Foam Buffing Pads

Kobe Eiko Power Tools

Kobe Eiko angle grinders are compact and robust grinders capable of handling the toughest of grinding jobs. Using the spindle lock, discs can be quickly and easily changed. For safety a slide switch controls the grinders with a 'quick-off' feature for immediate tool shut off for added safety.

A removable side handle improves control and comfort when the grinder is in use. External carbon brush caps allow the user to replace the motor brushes, as needed prolonging the life of the tool (Anticipated brush life of 140 hours, under normal use).

Weighing in it at only 1.4kg the Kobe Eiko compact angle grinders lightweight design is easy to handle and is excellent for overhead applications.

EGA100 100mm (4") Angle Grinder 650W

Specification:
Power input: 650W.
No load speed: 11,000rpm.
Disc size: (Dia)100 x (Bore)16mm.
Peripheral speed: 72m/s.
Supplied with: pin spanner and side handle.
Weight: 1.4kg.

Available as 240V or 110V.

Cubitron™ Fibre Sanding Discs

Cubitron™ II Fibre Discs are made with revolutionary 3M precision shaped ceramic grain technology, engineered with ultra-sharp, fast-cutting points that wear evenly, run cool and optimize mineral breakdown to maximize disc life.
Get more productivity, throughput, disc life, comfort and grinding speed.

3M Scotch-Brite? Surface Conditioning Belts

For removing grinding marks and scratches leaving a greatly improved surface finish.

Hook and Loop Backed

For use with a regular (sanding disc) flexible backing pad.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'A' Shape. Shank Diameter 6mm

Shape A13. Grade: RA60. Diameter: 28mm. Length: 28mm. Max. rpm: 34,000. Weight per 10: 390g.

Kennedy® Economy Emery Cloth

The emery abrasive particles are bonded by a high strength glue to a flexible J-weight blue twill backing cloth. The backing cloth allows the abrasive sheet to conform to the shape of the item being worked on, ensuring the abrasive action is always where you require it. Suitable for general-purpose, light duty workshop use.

Rolls

Roll size: (W)25mm x (L)50 Metres. Available in several grades.

High productivity, low consumption & ergonomic.

CP7779
1” compact impact wrench, 1475ft.lbs (1950Nm) of maximum torque in reverse. Insulating and lightweight composite handle. S2S easy forward reverse Side to Side patented technology. Lightweight with a magnesium clutch housing. Universal and durable twin hammer mechanism. Full teasing ergonomically developed trigger. Maximise operator comfort with a productive and lightweight tool. Energy saving.

Output drive: 1”.
Free speed: 7,000rpm.
Working torque range: 407 - 1464Nm.
Maximum torque: 1950Nm.
Average air consumption: 7.75cfm.
Air consumption @ load: 31cfm.
Air consumption @ load: 14.7l/s.
Air inlet NPTF: 1/2”.
Sound pressure level: 97dBA.
Vibration a (ISO-28927-2): 12.6m/s2.
Vibration K (ISO-28927-2): 3.4m/s2.
Length: 221mm.
Weight: 3.5kg.

Norton Straight Wheels For Surface Grinding

AVS: Aluminium oxide abrasive used on all ferrous materials including mild steel, carbon steels and wrought irons. CVS: Silicon catbide abrasive used on non-ferrous materials that includes copper, aluminium, stone and cemented carbides. 38A: Sharp, friable aluminium oxide abrasive used for grinding hard, heat sensitive steels. Well suited for cylindrical, surface and internal applications.



(Type 1) In a choice of Medium or Soft.

Cold water Pressure Washer

Poseidon 3-26 XT is one of a new compact line of cold water pressure washers for general, low intensity use by tradesmen, small farmers and garages. 130bar max. pressure. 550 litres per hour water flow. 2.9kW power consumption. 15m high pressure hose and hose reel. FlexoPower lance. Tornado Plus nozzle. Ergo 1000 spray gun.
Weight 38kg.

Poseidon 3-26XT