3M Aluminium Zirconia Fibre Discs

581C
A fit for purpose fibre disc for heavy, medium and light grinding applications. Good performance and a consistent quality finish. High performance alumina zirconia (AZ) mineral bonded to a vulcanized fibre backing. Conveniently packaged with 50 discs on a re-usable disc-holder clamping system, for easy storage and retention of disc shape and form. Good performance on stainless and mild steel as well as other ferrous and non-ferrous materials. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

115mm Diameter x 22mm Bore (Max 11,000rpm)

Kennedy® "Combi" Jigsaw Blade - Coarse Fine & Curve Cutting

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HCS - Medium Duty (Pack 5)

Double edged blade can be reversed in the machine to give the option of coarse cut or fine cut. Suitable for use on most woods, plastics, laminates etc. Reduced blade width also makes curve and profile cutting easier.
Supplied in cards of 5 blades.
Coarse Edge: 4mm Pitch x 70mm Effective Length
Fine Edge: 1.2mm Pitch x 40mm Effective Length

3M 777F/707E File Belts

Abrasive belts that utilise 3M 'CubitronTM' material bonded to a tough cloth backing. Both products incorporate a grinding aid to ensure long life and high cut rates on all metals. 'Cubitron' belts can be used to blend scratches left by coated abrasive belts.



20mm Wide x 457mm Long.

PCL Tyre Inflation Equipment

Diecast lightweight body with pressed steel trigger. Replaceable valve assembly requires less maintenance. Impact absorbing rubber bumper and magnified scale for easy reading. Hose length of 53cm and body length of 270mm x 50mm. Scale: 0-140psi/0-10 bar. Each gauge is supplied with a certificate of calibration and operating instructions. Comply with EC directive 86/217/EEC (bar scale only).

Mk 3 Air Line Gauges

Nilfisk Alto Replacement Dust Bags

To suit the Nilfisk Alto Attix 350-01 Wet & Dry Vacuum Cleaner

Kennedy® Depressed Centre and Flat Reinforced Grinding Discs

All Kennedy Depressed Centre and Flat Reinforced Cutting wheels now carry the "oSa" (The Organisation for the Safety of Abrasives) mark of approval. "oSa" is an association of the world's leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. "oSa" marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

Type 41 Flat Reinforced Cutting

For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatability. Not to be used for wet cutting.
Grade A24 - For general purpose cutting on metals.
Grade C24 - For general purpose cutting on stone.

DMT Diamond Whetstones

Made with real diamond (monocrystaline). Easy to use - requires only light pressure to produce a keen edge. Uses water as a lubricant. Can be used to hone and sharpen steel, ceramics, glass, tungsten carbide, stone, etc.

Diafold Conical File

102mm long. 3.2 to 9.5mm tapered for honing curved surfaces, serrated knives etc.

Kennedy® Portable Sander Belts

Resin Bond Aluminium Oxide Sanding Belts are designed for industrial applications. Durability combined with flexibility ensures a long life and first class performance. Suitable for wood and metal work.



100mm (4") Wide x 610mm (24") Long.

Makita Batteries for Cordless Tools

Spare batteries offer the advantage of continuous tool use while original batteries are charging therefore increasing productivity. Particularly useful on repetitive tasks over long periods i.e. production lines, circuit board manufacturing. Nickel Cadmium (Ni-Cd) and Nickel-Metal Hydride (Ni-Mh) versions available.

NiCd Batteries - ?Plug-In? Type (Straight)

Charger compatibility: DC1414F, DC1439, DC1822, DC1804F.

Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.