Batten Lampholders

White ceiling mounting, bayonet fitting with long skirt. Supplied complete with fixing screws.

Straight

York? Quick Change Screw Fitting Discs

For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC? system holders.



Zirconia Alumina Abrasive Discs for grinding and finishing of stainless steel.

Wet & Dry Vacuum Cleaner

A high-performance wet and dry vac for daily industrial vacuuming of spills that can create a hazard that can prove both dangerous and costly. Ultra-reliable, the ATTIX 961-01 will go on cleaning powerfully and quickly, day-in and day-out. It has two motors for industrial performance and a washable PET Fleece, big surface filter for high efficiency and low maintenance costs. The Push & Clean filter cleaning system gives high efficiency. The stainless steel tiltable and removable 70 L container is perfect for handling and disposal. Complete package with 38mm accessories that have stainless steel tubes and a 400 mm wet & dry floor nozzle. 10 metre cable for a large working radius. Applicable for wet & dry pick up by reliable floating system. Robust fleece filter bag is standard.

Available in 230V and 110V.

Attix 961-01

HP1640K

HP1640K
Input power: 680W.
No load speed: 2,800rpm.
Blows per minute: 44,800bpm.
Capacities: steel 13mm, wood 30mm, masonry 16mm.
Accessories: depth gauge.
carry case supplied.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'A' Shape. Shank Diameter 6mm

Shape A14. Grade: RA60. Diameter: 18mm. Length: 22mm. Max. rpm: 55,000. Weight per 10: 550g.

3M Scotch-Brite Hand Pads

A range of Scotch-Brite Hand pads designed for cleaning, blending and finishing applications on a variety of metals. 155 x 255mm.
7440 Brown ACRS: Heaviest duty pad in the range. Used for light deburring, cleaning and finishing applications.
7446 Grey SCRS: For heavy finishing and blending.
7486 Dark Green ACRS: For medium to coarse finishing and blending.
7496 Green AFIN: A general-purpose conformable hand pad which gives a slightly coarser finish than the Maroon 7447 hand pad.
7447 Maroon AVFN: General-purpose hand pad for cleaning and finishing. It can also be used for lacquer de-nibbing and mat finishing on solid surfaces.
7448 Grey SULFN: Ultra fine pad for light finishing on all minerals as well as lacquer de-nibbing.
7441 White Type T: Non-abrasive. For the removal of oxides and coatings, produces a scratch-free finish.

Replacement Hose for Henry/Hetty Vacuum Cleaners

2.5m length of replacement hose.

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Short Series

Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.

Kemet Gesswein Abrasive Stones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Gesswein DF Medium/Soft Aluminium Oxide

This is a popular fast-cutting stone which does not load easily. Good for all dies and moulds. Length 100mm.

NiCad Batteries - O-Type

2607335542 12.0V 1.5Ah GML24V/VCD, AL2422DC, AL2425DV, AL2450DV, AL2498FC