Kemet Gesswein Abrasive Stones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Gesswein EDM Hard/Aluminium Oxide.

Specially formulated for EDM scale removal. Length 150mm.

Canning-Lippert Felt Bobs Shanked

Supplied with fitted steel shank for use in drill chucks. A wide range of sizes to suit individual requirements.

Karcher Replacement Dust Bags

To suit the Karcher NT70/2 Wet & Dry Vacuum Cleaner.

York High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Zirconium Grade Glass Fibre Backed (For Stainless Steel - Non-Scratch).

127mm Dia x 22mm Bore 12,000 MOS (rpm).

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'B' Shape. Shank Diameter 3mm

Shape B102. Grade: RA180. Diameter: 16mm. Length: 13mm. Max. rpm: 44,000. Weight per 10: 60g.

Kennedy® Fibre Discs

Resin fibre, aluminium oxide sanding discs are designed for a wide range of industrial applications. High speed penetration of tough and high tensile materials combined with long disc life and optimum flexibility ensure Kennedy sanding discs give first class performance every time. Recommended for use with all portable grinders and sanders. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

178mm Diameter x 22mm Bore (Max 7,000rpm)

York? Polishing Mop Kits

York abrasives polishing kits contain the highest quality cool running pleated calico or sisal mops and polishing compositions to allow you to achieve the best results possible, on the material being polished. Each kit is supplied with step by step instructions and a unique non-loosening reverse wound arbor to allow use with drills, die grinders or bench grinders.

Plastic Polishing Kit

1 x Arbor 6mm shank
1 x Hard calico mop 4" x 1" with 3/8" bore
1 x Soft calico mop 4" x 1" with 3/8" bore
1 x 60gsm general finishing composition - beige bar
1 x 100gsm general finishing composition - brown bar.

DV18DSDL/JW 18V Combi Drill With 1x4.0AH LI-ION Battery

Combi drill with multiplex protection circuit for maximum battery life. Lightweight slide-in Li-Ion batteries. 2 speed gearbox to suit most applications.

Specifications:
No load speed: 0-400/0-1800rpm.
Max torque: 43Nm.
Blows per minute: 0 - 5600/0 - 21000bpm.
Max. drilling capacities: steel 13mm, wood 32mm, masonry 13mm.
Battery: 1x 18V - 4.0Ah.
Weight: 2.2kg.

3M Scotch-Brite Deburring Wheels DB-WL

Available in three different grades to cope with a range of deburring applications. Continuously exposes abrasive to the workpiece to produce a consistent finish throughout the life of the product. Will not undercut, gouge, or distort the workpiece. Silicon carbide, convolutely wound. Suitable for use on all metals.

York Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Flame Shape

Cut 6 - Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general purpose use.