Bosch GSH11VC 11kg Demolition Hammer with SDS Max

Rated power input: 1700W.
Max. impact energy: 23 Joules.
Impact rate at rated speed: 900 - 1700 bpm.
Toolholder: SDS-max.
Vibration level chiselling: 8.0 m/s².
Vibration level drilling/chiselling: 8.0 m/s².
Weight: 11.4kg.
Total shipping weight: 12kg.

Bosch Jigsaw Blades

Application: Stainless steel sheet 1.5 - 4mm (reduce stroke rate without orbital action), mild steel 1.5 - 4mm. Tungsten carbide teeth. Effective length: 50mm. Pitch: 1.06.

Hard Metal Carbide Tipped For Special Applications (Pack 3)

Karcher Wet & Dry Vacuum Cleaners

A new powerful and extremely robust wet & dry vacuum cleaner equipped with a unique, highly efficient, automatic filter cleaning device (TACT) designed to pick up large quantities of fine dust whilst maintaining constant high suction power.

This indispensable all purpose vacuum is great for keeping workshops or building sites clean. With a new innovative TACT (Triggered Air draft Cleaning Technology) system, Kärcher sets new standards in filter cleaning efficiency. This works via pressure reversal or filter back flushing which is activated every 15 seconds. Productivity is increased as the service time for filter and bag cleaning/changes are not required as often.

Features:
Constant high suction power - As a result of the fully automatic TACT filter cleaning system.
Innovative Eco flat pleated filter system.
On/off switch for TACT system with LED display.
Kärcher clip-system (suction hose).
Integrated accessory holder on back of the machine.
Suction hose and power cord can be stored on the turbine head.
Large recessed flat tray on top of the unit for holding tools and accessories.

NT 35/1 Wet & Dry Vacuum Cleaner

NT35/1 Specifications:
Max. power rating 1380W.
Air flow rate 61 l/s.
Vacuum max 23.0 KPa.
Container capacity 35L.
Weight 11.5kg.
Cord length 7.5m.
Noise level 64dB(A).

N.B. 110V version supplied without a plug.

Flexovit Grinding Wheels

A: A particularly tough aluminium oxide providing hard wearing wheels for general purpose, surface and off-hand grinding.

Type 1, Plain

Norton Straight Wheels For Surface Grinding

AVS: Aluminium oxide abrasive used on all ferrous materials including mild steel, carbon steels and wrought irons. CVS: Silicon catbide abrasive used on non-ferrous materials that includes copper, aluminium, stone and cemented carbides. 38A: Sharp, friable aluminium oxide abrasive used for grinding hard, heat sensitive steels. Well suited for cylindrical, surface and internal applications.



(Type 1) In a choice of Medium or Soft.

York Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Ball Shape

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 3mm

Shape W153. Grade: RA120. Diameter: 5mm. Length: 10mm. Max. rpm: 80,000. Weight per 10: 20g.

DeWalt Cordless Batteries

Least expensive cell technology. Has the least temperature sensitivity of the three battery types. A large number of charge cycles is possible.

DE9075-XJ 12V 2.4Ah NiCd Battery

Charger compatibility: DC011, DE9135, DE9112, DE9116, DE9117, DE9130, DE9216 and DE9219.

110mm Variable Speed Jigsaw

Variable speed jigsaw with soft grip handle. Four stage orbital action enables rapid and accurate cutting. Tool-free blade locking system. LED spotlight to illuminate cut line. Dust blower to ensure cut line is visible. Variable speed motor with electronic feedback speed control. Tough nickel plated die-cast aluminium base. Supplied with blade, splinter guard, chip guard, dust collector, hex key and tool case. Power input: 720W. No load speed: 850 - 3,000rpm. Capacities: mild steel 10mm, wood 110mm. Stroke length: 246mm. Min. corner radius: 25mm (1"). Length: 246mm. Weight: 2.2kg

CJ110MV

3M Scotch-Brite Deburring Wheels DB-WL

Available in three different grades to cope with a range of deburring applications. Continuously exposes abrasive to the workpiece to produce a consistent finish throughout the life of the product. Will not undercut, gouge, or distort the workpiece. Silicon carbide, convolutely wound. Suitable for use on all metals.