3M Aluminium Zirconia Fibre Discs

581C
A fit for purpose fibre disc for heavy, medium and light grinding applications. Good performance and a consistent quality finish. High performance alumina zirconia (AZ) mineral bonded to a vulcanized fibre backing. Conveniently packaged with 50 discs on a re-usable disc-holder clamping system, for easy storage and retention of disc shape and form. Good performance on stainless and mild steel as well as other ferrous and non-ferrous materials. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

115mm Diameter x 22mm Bore (Max 11,000rpm)

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Conical 14

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

3M Flap Discs 566A

Good performance at an economical price. Available in P120 for finer blending, refining and finishing work.

Applications: weld grinding, stock removal, deburring, deflashing, gate removal, edge chamfering, cleaning, blending, finishing.
Materials: all metals.
Mineral: alumina zirconia.
Backing: X-weight cotton cloth on reinforced glass fibre resin.
Coating: closed.
Bond: resin.

Flat Flap Discs

Size: 115mm.
P40, P60, P80 and P120 grit.

Rasta Depressed Centre & Flat Profile Cutting & Grinding Discs

For use with all portable machines. Not to be used for freehand or wet grinding. Type 27 Depressed Centre Portable Grinding Discs. Type 42 Depressed Centre Portable Cut-Off Discs. Type 41 Flat Portable Cut-Off Discs.

Type 41 Flat General Purpose Metal A30T Cutting

For steel/stainless steel. Fast cutting. Long wheel life. Free of iron, sulphur and chlorine. Made of corundum. Box quantity 25.

Kennedy® Pressure Gauges

Fitted with a 1/8" BSP brass thread, can be used to measure psi & bar readings and can be fitted directly onto any filter Regulator - Lubricators. Available in two diameter sizes (40mm & 50mm), made from tough ABS plastic. Back entry fittings.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'B' Shape. Shank Diameter 3mm

Shape B55. Grade: RA100. Diameter: 3mm. Length: 6mm. Max. rpm: 100,000. Weight per 10: 20g.

York? Quick Change Screw Fitting Discs

For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC? system holders.



Zirconia Alumina Abrasive Discs for grinding and finishing of stainless steel.

Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.

Rasta Depressed Centre & Flat Profile Cutting & Grinding Discs

For use with all portable machines. Not to be used for freehand or wet grinding. Type 27 Depressed Centre Portable Grinding Discs. Type 42 Depressed Centre Portable Cut-Off Discs. Type 41 Flat Portable Cut-Off Discs.

Type 41 Ultra Thin Metal/Inox AA46 T (C45) Cutting

For steel/stainless steel. Thin sheet applications. Comfortable cutting, Burr-free cutting result. High stability. Free of iron, sulphur and chlorine. Made of semi-precious corundum. Box quantity 25.

Kemet Gesswein Abrasive Stones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Gesswein EDM Hard/Aluminium Oxide.

Specially formulated for EDM scale removal. Length 150mm.