Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Star Spray Gun Accessories

Standard Duty

Needles

Kemet Gesswein Abrasive Stones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Gesswein EDM Hard/Aluminium Oxide.

Specially formulated for EDM scale removal. Length 150mm.

Kennedy® Power Tool Chisels

Suitable for tools with SDS Max system.

Chicago Pneumatic? Speed Air Ratchet

CP825
New improved ratchet head with a convenient forward/reverse button for one finger directional changes. Square handle design for positive grip. Easy speed control throughout range, maximum rundown speed of 200rpm. Compact/lightweight, ideal for confined working conditions. Applications: under-dashboard work, small engine repair, all small fasteners, etc.

Specifications:
1/4" square drive.
Standard bolt size: 6mm.
Working torque range: 6-20Nm.
Average air consumption: 2.5CFM.
Air inlet: 1/4" NPT.
Min hose size: 6mm.
Overall length: 165mm.
Weight: 0.85kg.

Hitachi 3 Function SDS-Plus Rotary Hammer Drill

800W motor, impact energy of 3.2 Joules, SDS tool receptor and three different functions gives the drill the ability to drill into concrete up to 24mm diameter, bore through wood with a 32mm auger and chisel or chase cable runs with a suitable SDS chisel.

Specifications:
Power input: 800W.
No load speed: 0 - 1,150rpm.
Impact rate: 0 - 4,600bpm.
Impact energy: 3.2J.
Capacities: concrete (drill bit) 24mm, concrete (core bit) 50mm, steel 13mm, wood 32mm.
Accessories: depth stop, side handle, carry case.

Available in 240V and 110V.

DH24PC3

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Aluminium Oxide Grade Glass Fibre Backed (General-Purpose - Non-Scratch)

115mm Dia x 22mm Bore 13,300 MOS (rpm).

Engis Hyprez Oilstones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Hyprez R.G. Medium Silicon Carbide

This stone is a mainstay, designed for general use. Length: 150mm.

3M Scotch-Brite Deburring Wheels DB-WL

Available in three different grades to cope with a range of deburring applications. Continuously exposes abrasive to the workpiece to produce a consistent finish throughout the life of the product. Will not undercut, gouge, or distort the workpiece. Silicon carbide, convolutely wound. Suitable for use on all metals.

230mm (9") 2000W Angle Grinder

GA9020KD
Makita 230mm Angle Grinder c/w Diamond Blade & Case. This model now offers outstanding durability, with increased heat resistance, superior anti-dust structure for added protection in dusty areas. The machined bevel gear provides more strength. The new design provides the operator with more comfort, featuring a soft grip for more control. Gear housing swivels at every 90°.

Specifications:
Input wattage: 2,000W
No load speed: 6,600rpm.
Wheel size: 230mm.
Bore size: 22mm.
Spindle size: M14 x 2mm.
Wire cup brush: 110mm.
Weight: 4.7kg
Supplied with: lock nut wrench, side handle, wheel guard, diamond blade and carry case.

Available in 240V and 110V.