Health & Safety Vacuum Cleaner

The handling of hazardous dust is a complex matter that demands innovative product development and competent engineering. As a specialist, Nilfisk-ALTO offers proven solutions in every Hazard Class involving the task of picking up health endangering dusts. See below for Class OEL levels.Approved for professionals. Working with hazardous dust demands the highest level of safety to ensure maximum protection. Nilfisk-ALTO offers Health and Safety vacuum cleaners for Hazardous dust classes ? L (light), M (medium), H (high), and Asbestos. The entire range is designed for professionals who demand low noise, ergonomics, long-life and Xperformance.

ATTIX30-2M PC

Achieving superior suction power in a compact and flexible solution. A perfect solution for craftsmen on the move. Working sound level: 59dB(A). Airflow: 3700ltr/min. Vacuum: 250mbar. Cable length: 7.5m.
Max. Permeability: 0.1%, Removes 99.9% of dusts with OEL values > 0.1mg/m and wood dust.
Automatic on/off control for use with power tools - when the tool is switched on, the cleaner switches on. giving you the cleaning power you need exactly when you want it. Antistatic as standard. With Push&Clean, to clean the filter, block the inlet fitting or the hose, and push and release the filter cleaning button. Powerful air pulses clean the filter and you are back to work in no time.

Makita Battery Chargers for Cordless Tools

Li-Ion/Makstar Chargers. These chargers use a built-in memory chip in the battery and a chip in the charger to decide on the best charging method. Optimal charging is achieved by controlling current, voltage and thermal. Additional chargers used in conjunction with extra batteries also increase productivity, charging batteries while not in use. Particularly useful on repetitive tasks over long periods i.e. production lines, circuit board manufacturing.

DC18SE Battery Charger (Car)

Li-Ion/NiMH quick charger for use in car/truck. 7.2 to 18V. 30 minute charge (1.5Ah battery).

Chicago Pneumatic® 6mm Mini Die Grinder

CP9106Q-B
High efficient and powerful 0.28hp (210W) motor. Low noise level. Variable top speed regulator. Composite overmould grip. Rear exhaust.

Specifications:
Collet size: 1/4" (6mm).
Free speed: 22000rpm.
Power: 210W 0.28hp.
Length: 120mm (4.7").
Weight: 0.7kg.
Noise level: 80db(A).
Sound power: 91db(A).
Vibration: 2.5 m/s2.
Average air consumption: 4.35cfm.
Actual air consumption: 8.7cfm.
Free speed air consumption: 19.3cfm.
Min. hose size: 3/8".
Air inlet: 1/4" NPTF.

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Aluminium Oxide Grade Aluminium Backed (General-Purpose)

100mm Dia x 16mm Bore 15,300 MOS (rpm).

Norton Straight Wheels For Surface Grinding

AVS: Aluminium oxide abrasive used on all ferrous materials including mild steel, carbon steels and wrought irons. CVS: Silicon catbide abrasive used on non-ferrous materials that includes copper, aluminium, stone and cemented carbides. 38A: Sharp, friable aluminium oxide abrasive used for grinding hard, heat sensitive steels. Well suited for cylindrical, surface and internal applications.



(Type 1) In a choice of Medium or Soft.

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.
N.B. - 3mm Shank

Cylindrical Plain End

Cut 6 - Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general purpose use.

Kennedy® Fibre Discs

Resin fibre, aluminium oxide sanding discs are designed for a wide range of industrial applications. High speed penetration of tough and high tensile materials combined with long disc life and optimum flexibility ensure Kennedy sanding discs give first class performance every time. Recommended for use with all portable grinders and sanders. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

178mm Diameter x 22mm Bore (Max 7,000rpm)

3M Premium Cubitron™ Fibre Discs

985C
3M's premium blended Cubitron™ disc. Superior performance in all metal grinding applications. More aggressive cut and longer life than 3M 785C discs. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

115mm Diameter x 22mm Bore (Max 11,000rpm)

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Ball Nosed

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Hitachi Variable Rotary Drill

Variable speed with forward and reverse action. Soft grip handle. Chuck capacity: 10mm. Power input: 710W. No load speed: 0-3000rpm. Capacities: Steel: 10mm, wood: 25mm.

D10VF