Kennedy® Tripod Site Lights

Halogen bulb head fitted with 5 metre cable and plug. Heavy duty steel tubing. Extends to over 8 feet.

Fixed Leg

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Aluminium Oxide Grade Glass Fibre Backed (General-Purpose - Non-Scratch)

115mm Dia x 22mm Bore 13,300 MOS (rpm).

Cordless Screwdriver

Features a pivot setting, allowing for working in hard to reach places and a spotlight for better sight of the workpiece, ensuring more comfortable working in poorly lit areas. The soft grip and ergonomic handle size allows for optimum comfort and control whilst working, whilst the forward/reverse indicator enables the user to see, at a glance, which direction the tool is driving in.
Also features Electronic Cell Protection (ECP), to further protect the battery against overloading, overheating or deep discharge. Li-ion Technology - longer life and no memory loss effect, fast change of accessories thanks to the hex connection with magnet. Supplied with 2 screw bits- PH2 & S5.

2536 3.6V Li-ion TWIST

18v Impact Screwdriver

Very compact with overall length of only 146mm. LED Job light with afterglow.
Supplied with fast charger, battery cartridges, phillips bit, belt clip, case.
No Load Speed: 0-2,300
Impacts per Minute: 3,200
Max. Torque: 145Nm
Machine Screws: M4-M8
Standard Bolt: M5-M14
Coarse thread (length): 22mm-125mm
High Tensile Bolt: M5-M12
Battery: Li-ion
Net Weight: 1.5kg

BTD140RFE

NiCad Batteries - O-Type

2607335528 14.0V 1.2Ah GML24V/VCD, AL2422DC, AL2425DV, AL2450DV, AL2498FC

Hitachi 190mm Circular Saw

C7U2
Powerful 1200W motor. Heavy duty aluminium base. Blower ensures cut line is always visible. Adjustable metal cut line guide. Soft grip handle. External brush caps for easy replacement. Unique 90° angle setting system ensures accuracy of 90 cuts. Spindle lock for easy blade replacement

Specifications:
Blade diameter: 190mm.
Bore size: 30mm.
Max cut depth 0°: 66mm.
Max cut depth 45°: 48mm.
Power input: 1200W.
No load speed: 5500/min.
Weight: 4.0kg.
Supplied with: 18 tooth TCT saw blade, guide, dust collection adapter, wrench and carrying case.

Available in 240V and 110V.

York? Velcro-Backed Sanding Sheets

Aluminium oxide abrasive "resin-bonded over resin" to Velcro backed paper suitable for wood, plastics, ceramics etc.

7 Hole. Dust Extraction Type

Size: 165mm x 75mm.

Kobe™ "Oil-Free" Compressors

These Direct Drive oil-free compressors are built of quality materials to ensure trouble free use and can be run on a normal 240v domestic supply. Robust in manufacture, they all come with a pressure cut-off switch, fully automatic stop/start control, tank and line pressure gauges and an air outlet regulator.

1.5HP 6Ltr Compressor

This compressor may be small in size and weight (only 18.6Kg) but it has an output of up to 8Bar producing up to 115psi and 140Ltr/min.
Suitable for DIY, home improvement and workshop use, NOT suitable for continuous use.

Kennedy® Silversmith Stones

Aluminium Oxide man-made abrasive which is extremely tough enabling high speed penetration of high tensile materials without causing excessive fracturing. This resistance to fracturing makes it a versatile material suitable for general sharpening and honing applications.

Aluminium Oxide

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'A' Shape. Shank Diameter 6mm

Shape A26. Grade: RA60. Diameter: 16mm. Length: 16mm. Max. rpm: 60,000. Weight per 10: 150g.