Kennedy® "T" Type Shank Jigsaw Blades

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HCS - Medium Duty (Pack 5)

Jigsaw Blade (Equivalent to Bosch T111C)
Application: wood 60mm, plastics 30mm.
Blade: HCS medium duty, side set teeth.
Tooth pitch: 3.0mm.

Effective length: 75mm.

Pack of 5.

Kennedy® Wire Wheels & Brushes

Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.

Cup Brushes Twisted Knot - Threaded Bore

For fast and heavy duty cleaning. The support ring prevents excessive spreading. For removal of rust, paint and scale on large surfaces. 50 SWG

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Kennedy® 12 Piece High Performance Router Cutter Set

Manufactured from high speed steel with tungsten carbide tips. Precision ground cutting edges for improved surface finish and longer tool life. Ideal for the production environment. All on a 1/4" shank.



Contents:
Two Flute Core Box Bit: 12.7mm diameter x 6.3mm radius.
Two Flute Core Bit: 22mm diameter x 6.3mm radius with ball bearing guide.
Two Flute Dovetail Bit: 12.7mm diameter x 14° side cutting angle.
Two Flute Chamfering Bit: 32mm diameter x 45° side cutting angle with ball bearing guide.
Two Flute Flush Trimming Bit: 12.7mm diameter with ball bearing guide.
Two Flute Straight Template Bit: 16mm diameter.
Two Flute Beading Bit: 22mm diameter x 6.3mm radius with ball bearing guide.
Two Flute Straight Trimming Bit: 12mm diameter.
Two Flute Straight Trimming Bit: 6mm diameter.
Two Flute Rounding Over Bit: 28.6mm diameter x 9.5mm radius with ball bearing guide.
Two Flute "V" Grooving Bit: 12.7mm diameter x 90° inclusive cutting angle.
Two Flute Roman Ogee Bit: 25.4mm diameter x 14.5mm.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'B' Shape. Shank Diameter 3mm

Shape B83. Grade: RA120. Diameter: 10mm. Length: 5mm. Max. rpm: 87,000. Weight per 10: 30g.

Kennedy® Depressed Centre and Flat Reinforced Grinding Discs

All Kennedy Depressed Centre and Flat Reinforced Cutting wheels now carry the "oSa" (The Organisation for the Safety of Abrasives) mark of approval. "oSa" is an association of the world's leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. "oSa" marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

Type 27 Depressed Centre Grinding

For use with all portable angle grinders. Not to be used for wet grinding. Optimum angle for use 25° to 35°. Grade A30/AS30 - for general purpose use on metals. INOX - for use on Stainless steel (iron, chlorine and sulphur free).

Kennedy® Power Tool Chisels

Suitable for tools with SDS Max system.

Kennedy® Fabric Backed Lambs Wool Bonnets

Natural fabric backed wool bonnet. Ideal for use on surfaces of all colours. 20mm pile. Diameter 178mm.

Kennedy® Fibre Discs

Resin fibre, aluminium oxide sanding discs are designed for a wide range of industrial applications. High speed penetration of tough and high tensile materials combined with long disc life and optimum flexibility ensure Kennedy sanding discs give first class performance every time. Recommended for use with all portable grinders and sanders. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

100mm Diameter x 16mm Bore (Max 12,400rpm)

Kennedy Screwdriver Bits

Kennedy contractor screwdriver bit packs contain the most popular types of driver bits, multi-packed for economy.

Manufactured from high alloy chrome molybdenum steel (hardness 58-62HRC) ideal for hand and power tool use.

Supplied in plastic pocket cases that are ideal for the industrial user.

6mm (1/4”) Hex No.2 PZ Screwdriver Bits

Supplied in pack of 10.