Kobe™ Additional Collets

To suit Kobe and similar die grinders.

Kobe™ Collet Nuts

To suit Kobe and similar die grinders.
SM-51225 Collet Nut - Short
SM-55225 Collet Nut - Long

Kobe™ 115° Angle Die Grinder

FDG115
For polishing, buffing, deburring and grinding. Rubber handle provides grip and operator comfort. 115° angle head for flexibility in tight areas. Speed regulator. Safety release throttle. Rear exhaust. Ball bearing construction for long tool life.

Box contents: 115° angle die grinder, two collet spanners and a comprehensive instruction manual.

Specifications:
Free speed: 22,000rpm.
Collet size: 6mm.
Air inlet thread 1/4" NPT.
Minimum air hose size: 3/8" (10mm).
Air pressure: 90PSI/6.2Bar.
Air consumption: 4CFM*.
Sound pressure level: 90dB(A).
Sound power level: 97db(A).
Vibration level: 1.05m/s2.
Overall length: 195mm.
Net weight: 524gm.

*Based on a 15 second cycle per minute average use.

13mm Reversible Pistol Grip Air Drill

The Kobe? FDP500 reversible pistol grip air drill delivers high torque drilling performance. Suitable for screw driving, hole sawing and cylinder honing. The rubber handle and adjustable side handle help to ensure a stable grip and improved operator comfort over extended periods of use, whilst the 13mm Jacobs industrial chuck and heavy-duty gearing system with oil-less bushing maintain concentricity of the tool point. The short gear case design reduces the overall size of the drill allowing it to be used in confined areas by fitters etc. Spring loaded rotor vanes deliver every gram of power to the motor to make the FDP500 as economic to run as possible and the rear exhaust directs the exhaust air away form the workpiece and operator. Ball bearing construction for a long tool life.

For the full range of Kobe? Power and Air tools please refer to our catalogue.

FDP500

Specification:
Free speed: 500rpm.
Chuck size: 1.5-13mm (1/16?? - 1/2??)
Spindle thread: 10mm (3/8??).
Air inlet thread: 1/4?? NPT.
Minimum air hose size (ID): 10mm (3/8??).
Air pressure: 90PSI/6.2Bar.
Air consumption: 3.65CFM.
Sound pressure level: 95 dB(A)
Sound power level: 100 dB(A)
Vibration level: 0.4 m/s2.
Overall length: 240mm.
Net weight: 1.77kg.

Supplied with: support handle, chuck key and manual.

Kobe? Mini Random Orbital Air Sander Kit

Compact and lightweight for easy access in restricted areas. Uses both 2" and 3" backing pads. Rubber handle provides grip and operator comfort. Two finger throttle for easier control and less fatigue. Adjustable power regulator to match the speed to the job. Silenced Handle Exhaust directs air away from the Workpiece. Ball bearing construction for a long tool life.

FOS003mk Sander.
Free speed: 15,000rpm.
Air inlet thread: 1/4?? NPT.
Minimum air hose size (ID): 3/8??(10mm).
Air pressure: 90PSI/6.2Bar.
Air consumption: 4CFM*.
Sound pressure level: 87dB(A).
Sound power level: 94dB(A).
Vibration level: 0.9m/s2.
Net weight: 611gm.

Kit contains:
1x mini orbital sander.
2?? and 3?? backing pads.
10x 2?? 320, 400 and 600 grit sand paper.
10x 3?? 320, 400 and 600 grit sand paper.
Spindle key and comprehensive instructions.
Robust blow moulded carry case.

*Based on a 15 second cycle per minute average use.

Kobe Speed Air Ratchets

Suitable for the removal and installation of threaded fasteners when doing automotive and light assembly work. Reversible hardened steel square drive. Rubber handle provides grip and operator comfort with reduced hand chill. Three planetary gears for longer life and smoother running. Rubber cover protects the ratchet head and the workpiece. Short body length allows access into hard to reach areas. Low profile teasing throttle for precise speed control. Rotating rear exhaust with baffle for reduced noise. Rotating air inlet to prevent the air hose tangling. Adjustable air regulator.

Air Ratchet Speed Wrench (3/8?? Square Drive)

FSR375.
Specifications:
Working torque range: 7-27Nm (5-20ft-lbs).
Anvil size: 3/8".
Free speed: 200rpm.
Air inlet thread: 1/4" NPT.
Minimum air hose size (ID): 10mm (3/8").
Air pressure: 6.2bar (90psi).
Air consumption: 113Ltr/m (4CFM)*.
Sound power level: 88dB(A).
Sound pressure/noise level: 84dB(A).
Vibration level: 1.8m/s2.
Overall length: 205mm.
Net weight: 640g.

*Based on a 15 second cycle per minute average use.

Kobe™ 150mm Random Orbital Air Sander

FSO150
Suitable for shaping, blending, smoothing body filler and rapid material removal. Rubber handle provides grip and operator comfort. Random orbit for a swirl-free finish. One or two-handed operation. Can be used for wet sanding. Due to its self-generating vacuum, it can be attached to a Portable Dust Collection System to help reduce airborne dust and clean-up time. Rotating air inlet to prevent the air hose tangling. Speed control conveniently located for easy adjustment. Ball bearing construction for a long tool life.

Specifications:
Backing pad size: 150mm (6").
Backing pad type: Hook & Loop.
Orbit diameter: 5mm (3/16").
Suction type: Self-generating vacuum.
Spindle size: 5/16" NPT.
Free speed: 10,000rpm.
Air inlet thread: 1/4" NPT.
Minimum air hose size (ID): 10mm (3/8").
Air pressure: 6.2Bar (90PSI).
Motor power: 0.2hp.
Air consumption: 3CFM* (85Ltr/min).
Sound power level: 90dBA.
Sound pressure/noise level: 84dBA.
Vibration level: 5.6m/s2.
Overall length: 280mm.
Net weight: 1.04kg.

Kobe™ Additional Collets

To suit Kobe and similar die grinders.

Kobe? 50mm Mini Angle Grinder

FAG050M
For metal dressing, rust removal, weld preparation and automotive bodywork fabrication in hard to reach areas. Rubber handle provides grip and operator comfort. Speed regulator. Safety release throttle. Heavy duty disc guard. Side exhaust. Ball bearing construction for long tool life. Supplied with 2 x A60, 1 x A80 and 1 x A120 50mm grinding discs.

Specifications:
Free speed: 20,000rpm.
Disc size: 50 x 4 x 9.6mm (2?? x 5/32?? x 3/8??).
Air inlet thread: 1/4?? NPT.
Minimum air hose size (Id): 3/8?? (10mm).
Air pressure: 90PSI/6.2Bar.
Air consumption: 4CFM*.
Sound pressure level: 83db(A).
Sound power level: 92db(A).
Vibration level: 1.7m/s2.
Overall length: 140mm.
Net weight: 530g.

*Based on a 15 second cycle per minute average use.

Kobe™ Extended Spindle Die Grinder

FDG180e
For polishing, buffing, deburring and grinding. Rubber handle provides grip and operator comfort. Extended head for flexibility in tight areas. Speed regulator. Safety release throttle. Rear exhaust. Ball bearing construction for long tool life.

Box contents: Extended die grinder, two collet spanners and a comprehensive instruction manual.

Specifications:
Free speed: 25,000rpm.
Collet size: 6mm.
Air inlet thread: 1/4" NPT.
Minimum air hose size (ID): 3/8" (10mm).
Air pressure: 90PSI/6.2Bar.
Air consumption: 4CFM*.
Sound pressure level: 91dB(A).
Sound power level: 98dB(A).
Vibration level: 4.53m/s2.
Overall length: 253mm.
Net weight: 657gm.

*Based on a 15 second cycle per minute average use.