Kobe Air Tools

The Kobe RPP480 air riveter is a lightweight & powerful tool for blind riveting.
Easy maintenance.
Supplied complete with 2.4mm (3/32”), 3.2mm (1/8”), 4.0mm (5/32”), 4.8mm (3/16”) Nosepieces.

RPP480 Air Riveter

RPP480 Specification:
Recommended Air Pressure: 70-90psi.
Air Consumption: 4cfm (113L/Min)*.
Air Inlet Thread: 1&fras1;4” NPT.
Air Hose Size (Id): 10mm (3&fras1;8”).
Nosepiece Sizes: 2.4mm (3&fras1;32”), 3.2mm (1&fras1;8”), 4.0mm (5&fras1;32”), 4.8mm (3&fras1;16”).
Overall Length: 165mm.
Overall Height: 274mm.
Net Weight: 1.5kg.
* Based On 15 Second Cycle Per Minute Average Use.

NB160 High Performance Air Nibbler

NB160
Produces burr free cuts without distortion. Ideal for body shop & sheet metal work. Teasing throttle for precise control.

Specifications:
1/4" NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption
Cutting capacity: 1.6mm (steel) to 3.0mm (aluminium). Overall length: 180mm.

*Based on a 15 second cycle per minute average use.

Kobe™ 10mm Heavy-Duty Air Pistol Drill

DP2610
10mm Jacobs chuck, stall resistant, directional front exhaust, hammer finish casing, needle bearing gears, 3/8"- 24 spindle thread.

Specifications:
Air inlet thread: 1/4" NPT.
Minimum air hose size (ID): 3/8"(10mm).
Chuck capacity: 10mm.
Spindle thread: 3/8" - 24.
Air pressure: 90PSI/6.3Bar.
Air consumption: 4CFM* (144 ltr/min).
Sound pressure level: 87 dBA.
Sound power level: 103 dBA.
Vibration level: 2.5 m/s2.
Overall length: 180mm.

*Based on a 15 second cycle per minute average use.

Kobe 100mm (4") Angle Grinder

GA1011L
Adjustable safety guard, safety lever throttle. Supplied with auxiliary side handle, flanges and spanners, lightweight and compact.

Specifications:
1/4?? NPT air inlet thread for 10mm air hose.
90PSI air pressure.
6CFM* air consumption.
3/8" - 24 spindle thread and an overall length of 230mm.

*Based on a 15 second cycle per minute average use.

Kobe? General Duty Air Hammer & Chisel Kit

HP5040K
Supplied with flat chisel, spot weld breaker, taper punch & rivet cutter. Variable power regulator. Accepts all standard 0.401? shank tools.

Specifications:
1/4?? NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
Overall length: 135mm.
Stroke length: 40mm.

*Based on a 15 second cycle per minute average use.

Kobe? Air Hammer Chucks

Suitable for use with all Kobe air hammers. Cannot accidentally be released.

Quick Change Chuck

Spring loaded front collar, that must be pulled forward to allow tool release.

Kobe 10mm Reversible Angle Air Drill

DAR1510
10mm Jacobs chuck, fingertip control of reverse, reverse exhaust, overall head height 94mm,

Specifications:
1/4" NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
3/8" - 24 spindle thread.
Overall length 178mm.

*Based on a 15 second cycle per minute average use.

Kobe™ Surface Conditioning and Finishing Kit

Multi-purpose kit containing:
one of each of the following surface preparation discs - fine, medium & coarse.
2x abrasive disc grades - P36, P60, P80 & P120.
1x 6mm diameter shank to fit the backing pad.
One Kobe angle die grinder with 1/4" NPT air inlet thread for 10mm air hose, 90PSI air pressure, 4CFM* air consumption.
Supplied in a sturdy plastic carry case.

*Based on a 15 second cycle per minute average use.

Kobe? Heavy-Duty Pistol Grip Air Hammer

HP2190
For a wide range of workshop and automotive uses. Supplied with retainer spring. Accepts all standard 0.401" shank tools.

Specifications:
1/4?? NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
Overall length: 225mm.
Stroke length: 90mm.

*Based on a 15 second cycle per minute average use.

Kobe Bench Grinders

The Kobe GB200 bench grinder has a powerful 385W motor ideally suited to Industrial/workshop use.

Features include:
Robust construction with sturdy work supports.
Spark Deflectors.
Wheel guards.
Positive ON/OFF switch.
Supplied with one 36 Grit wheel and one 60 Grit wheel.

CE approved.

GB200 200mm (8”) Bench Grinder

GB200 Bench Grinder Specification:
Motor Supply Voltage: 230-240V/50Hz.
Power: 1/2HP.
Power Input: 385W.
Motor Speed: 2,800rpm.
Shaft dia: 22mm.
Grinding Wheel Diameter: 200mm (8”).
Grinding Wheel Width: 6-25mm.
Sound Power Level: 94dBA.
Sound Pressure: 72.2dBA.
Net Dimensions: 270x480x265mm (HxWxD).
Net Weight: 21.2kg.