Kobe™ 10mm Air Pistol Drill

DP2210
10mm Jacobs chuck, stall resistant, heavy duty bearings, 1/2" HP motor, 3/8" - 24 spindle thread.

Specifications:
Air inlet thread: 1/4" NPT.
Minimum air hose size (ID): 3/8"(10mm).
Chuck capacity: 10mm.
Spindle thread: 3/8" - 24.
Air pressure: 90PSI/6.3Bar.
Air consumption: 4CFM* (144 ltr/min).
Sound pressure level: 87dBA.
Sound power level: 103dBA.
Vibration level: 1.5m/s2.
Overall length: 165mm.

*Based on a 15 second cycle per minute average use.

Kobe™ Additional Collets

To suit Kobe and similar micro die grinders.

Kobe Industrial Air Tools

The Kobe IWS500 is a tough industrial air impact wrench, with a 10 position power regulator and thumb switch for selecting reverse. Fully polished single piece aluminium housing with bump guards.

IWS500 1/2" Impact Wrench Kit

IWS500 spefication:
Drive: 1/2''Sq
Working maximum Torque: 325 Nm
Operating pressure: 90psi
Air inlet thread: 1/4'' NPT for 10mm air hose.
Air consumption: 4CFM*.
Bolt capacity: 16mm.
Overall length: 191mm.
Free speed: 7,000rpm.
Noise level: 93dB(A).
Vibration: 1.21 m/s2.

Set includes:
1/2'' impact wrench.
10 metric sockets: 9, 10, 11, 12, 13, 14, 17, 22, 24 and 27mm.
Threaded tailpiece, in-line mini-oiler and oil bottle.
Kit supplied complete in robust blow-moulded case.

*Based on a 15 second cycle per minute average use.

Kobe Pistol Air Screwdriver Kit

SP1825K
Specifications:
1/4" NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
45 - 115lbs/inch.
Overall length: 178mm.
1/4" hex drive capacity.

Contents:
SP1825 screwdriver.
Hexagon wrench and spanner.
No.1, 2 & 3 x 50mm crosspoint bits.
4, 5 & 6mm x 50mm slotted bits.
No.2 x 100mm crosspoint double-ended bit.

*Based on a 15 second cycle per minute average use.

Kobe™ Surface Conditioning and Finishing Kit

Multi-purpose kit containing:
one of each of the following surface preparation discs - fine, medium & coarse.
2x abrasive disc grades - P36, P60, P80 & P120.
1x 6mm diameter shank to fit the backing pad.
One Kobe angle die grinder with 1/4" NPT air inlet thread for 10mm air hose, 90PSI air pressure, 4CFM* air consumption.
Supplied in a sturdy plastic carry case.

*Based on a 15 second cycle per minute average use.

Silicon Carbide Grinding Wheel to suit drill sharpener

For use with the Drill Bit Sharpener MTS256-2001A.

Kobe Bench Grinders

The Kobe GB150 is an Industrial quality bench grinder suitable for the professional user.

Features include:
Adjustable tool rest and spark deflector.
Maintenance free motor.
Eye shield.
Smooth and quiet operation.
Supplied with one 36 grit and one 60 grit wheel.

CE approved.
GB150 150mm (6") Bench Grinder
GB150 Bench Grinder Specification:
Voltage: 240V.
Mains Frequency: 50HZ.
Power: 1/2HP
Power Input: 385W
No load Speed: 2800rpm
Grinding Wheel Diameter: 150mm (6”).
Grinding Wheel Width: 6-25mm
Shaft dia: 22mm
Weight: 11Kg

What "Practical Classics" magazine say..."Best Buy"

"Owners of small benches beware: this grinder is enormous – nearly 400mm wide and a hefty 15.5kg in weight. This is about as big as a 150mm-wheel bench grinder gets, but this machine isn't overweight, it's just been built to last. Materials are all top notch, even the spark shields are a cut above the rest – big, thick and as clear as glass to look through. The Kobe gets up to its unloaded working speed of 2,800rpm in less than three seconds and this well-balanced unit delivers a virtually vibration-free performance. The 385W motor simply will not stall. This is particularly good news if you plan to fit high drag accessories like a wire wheel – you can bust classic car rust with impunity. We also like the fact that the Kobe needs only minimal assembly – just the spark shields need to be fitted, and the bolts are already in place. This is a lot of workshop bench grinder for the price."

Kobe™ Angle Die Grinder

GDA2206L
Safety lever throttle, reverse exhaust, Ideal for polishing, grinding & buffing. suitable for use in confined areas.

Specifications:
1/4" NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
Overall length 160mm.
Collet size 6mm.

*Based on a 15 second cycle per minute average use.

Kobe? Saw Blades

HSS body saw blades with two tooth pitch variations. 24 tooth (medium) and 32 tooth (fine) to suit a wide range of applications. N.B. Tool not included.

Kobe? Shear Head Only

Produces burr free cuts without distortion. Ideal for body shop & sheet metal work. Suitable for use with Kobe SH120 rapid cutting metal shear.