Kobe Industrial Air Tools

The Kobe IWS500 is a tough industrial air impact wrench, with a 10 position power regulator and thumb switch for selecting reverse. Fully polished single piece aluminium housing with bump guards.

IWS500 1/2" Impact Wrench Kit

IWS500 spefication:
Drive: 1/2''Sq
Working maximum Torque: 325 Nm
Operating pressure: 90psi
Air inlet thread: 1/4'' NPT for 10mm air hose.
Air consumption: 4CFM*.
Bolt capacity: 16mm.
Overall length: 191mm.
Free speed: 7,000rpm.
Noise level: 93dB(A).
Vibration: 1.21 m/s2.

Set includes:
1/2'' impact wrench.
10 metric sockets: 9, 10, 11, 12, 13, 14, 17, 22, 24 and 27mm.
Threaded tailpiece, in-line mini-oiler and oil bottle.
Kit supplied complete in robust blow-moulded case.

*Based on a 15 second cycle per minute average use.

Kobe? Scaler Needles (Set of 10)

For use with Kobe Needle Scaler NS4030 (illustrated).

Kobe Air Tools

The Kobe RPP480 air riveter is a lightweight & powerful tool for blind riveting.
Easy maintenance.
Supplied complete with 2.4mm (3/32”), 3.2mm (1/8”), 4.0mm (5/32”), 4.8mm (3/16”) Nosepieces.

RPP480 Air Riveter

RPP480 Specification:
Recommended Air Pressure: 70-90psi.
Air Consumption: 4cfm (113L/Min)*.
Air Inlet Thread: 1&fras1;4” NPT.
Air Hose Size (Id): 10mm (3&fras1;8”).
Nosepiece Sizes: 2.4mm (3&fras1;32”), 3.2mm (1&fras1;8”), 4.0mm (5&fras1;32”), 4.8mm (3&fras1;16”).
Overall Length: 165mm.
Overall Height: 274mm.
Net Weight: 1.5kg.
* Based On 15 Second Cycle Per Minute Average Use.

Kobe™ Surface Conditioning and Finishing Kit

Multi-purpose kit containing:
one of each of the following surface preparation discs - fine, medium & coarse.
2x abrasive disc grades - P36, P60, P80 & P120.
1x 6mm diameter shank to fit the backing pad.
One Kobe angle die grinder with 1/4" NPT air inlet thread for 10mm air hose, 90PSI air pressure, 4CFM* air consumption.
Supplied in a sturdy plastic carry case.

*Based on a 15 second cycle per minute average use.

Speed Ratches

SR375
Ball type retainer, disc type reversing action, compact, lightweight design, ideal for automotive work.

Specifications:
10mm bolt capacity.
1/4" NPT air inlet thread for 10mm air hose.
150rpm free speed.
90psi air pressure.
4CFM* air consumption.
50ft/lbs torque.
Front exhaust
Overall length: 255mm.

*Based on a 15 second cycle per minute average use.

Kobe Air Ratchet Speed Wrench (3/8?? Square Drive)

Kobe Production Mini Belt Air Sander Kit

Suitable for shaping, paint removal, weld sanding, smoothing and rust removal on flat or curved surfaces. Kit includes the MBS025-X Mini Belt Sander. Supplied complete with 9 flexible abrasive belts and 5 contact arms with heavy duty nose rollers allowing the belts to conform to a variety of contours. Rated for continuous use. Uses 6, 10, 13 and 20mm wide by 457mm long abrasive belts. Quick abrasive change. Adjustable sanding arm angle. Speed regulator. Multi positional sanding arm. Rear handle exhaust with noise baffler. One handed trigger operation. Rotating air inlet to prevent the air hose from tangling. Removable side arm for use in tight areas. Easily adjustable belt tracking. Optional 25mm contact arm KBE-280-5650K.

MBS025-X Mini Belt Sander:
Specifications:
Belt size: 457mm(18??) x 6, 10, 13 & 20mm.
Free speed: 18,000rpm.
Air inlet thread: 1/4?? NPT.
Minimum air hose size (ID): 10mm (3/8??).
Air pressure: 6.2Bar (90PSI).
Motor power: 0.6hp.
Air consumption: 113Ltr/m (4CFM)*.
Sound power level: 92dB(A).
Sound pressure/noise level: 84dB(A).
Vibration level: 0.8m/s2.
Overall length: 390mm.
Net weight: 1.36kg.

Kit contents:
MBS025-X Mini Belt Sander.
Surface preparation file belts: 20mm P80 grit (coarse), 13mm P300 grit (fine).
Aluminium oxide file belts: 20mm P60 grit, 20mm P80 grit, 13mm P80 grit, 13mm P120 grit, 10mm P120 grit, 10mm P150 grit, 6mm P150 grit.
Contact arms: 6mm, 10mm, 13mm, 20mm contact arm with flat roller. 10mm contact arm with rounded roller.
4mm hexagon key L-wrench.

Kobe? Shear Head Only

Produces burr free cuts without distortion. Ideal for body shop & sheet metal work. Suitable for use with Kobe SH120 rapid cutting metal shear.

NB160 High Performance Air Nibbler

NB160
Produces burr free cuts without distortion. Ideal for body shop & sheet metal work. Teasing throttle for precise control.

Specifications:
1/4" NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption
Cutting capacity: 1.6mm (steel) to 3.0mm (aluminium). Overall length: 180mm.

*Based on a 15 second cycle per minute average use.

Kobe™ 10mm Air Pistol Drill

DP2210
10mm Jacobs chuck, stall resistant, heavy duty bearings, 1/2" HP motor, 3/8" - 24 spindle thread.

Specifications:
Air inlet thread: 1/4" NPT.
Minimum air hose size (ID): 3/8"(10mm).
Chuck capacity: 10mm.
Spindle thread: 3/8" - 24.
Air pressure: 90PSI/6.3Bar.
Air consumption: 4CFM* (144 ltr/min).
Sound pressure level: 87dBA.
Sound power level: 103dBA.
Vibration level: 1.5m/s2.
Overall length: 165mm.

*Based on a 15 second cycle per minute average use.

Kobe 10mm Reversible Angle Air Drill

DAR1510
10mm Jacobs chuck, fingertip control of reverse, reverse exhaust, overall head height 94mm,

Specifications:
1/4" NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
3/8" - 24 spindle thread.
Overall length 178mm.

*Based on a 15 second cycle per minute average use.