Kobe? Retractable Air and Water Hose Reel

For use on assembly lines, service vans, workshops, etc. Helps to eliminate air hose entanglement hazards in the workplace. Can be fixed to the wall or ceiling. UV stabilised impact resistant plastic case. Locking ratchet. Smooth retraction. 1.5m connection hose. Male inlet and outlet made from solid brass. High quality roll formed drive spring. PVC hose rated to 17bar. 160 pivot. Air tool hanging hole. Can be easily detached from the bracket.

HRR008 8mm x 12M Retractable Air & Water Hose Reel

Inlet/outlet hose connection 1/4 BSP.

Kobe? Retractable Air and Water Hose Reel

For use on assembly lines, service vans, workshops, etc. Helps to eliminate air hose entanglement hazards in the workplace. Can be fixed to the wall or ceiling. UV stabilised impact resistant plastic case. Locking ratchet. Smooth retraction. 1.5m connection hose. Male inlet and outlet made from solid brass. High quality roll formed drive spring. PVC hose rated to 17bar. 160 pivot. Air tool hanging hole. Can be easily detached from the bracket.

HRR010 10mm x 10M Retractable Air & Water Hose Reel

Inlet/outlet hose connection 1/4 BSP.

Kobe? Mini Oiler

Feeds oil directly into the airline ensuring your air tool is well lubricated at all times preventing corrosion. The clear body reservoir allows immediate inspection of the oil level. All brass construction.

Kobe? Needle Scaler Attachment

Converts a pneumatic hammer into a needle scaler.

Kobe™ 1" Drive Heavy-Duty In-Line Air Impact Wrench

Suitable for industrial and commercial production and assembly applications. Side handle for two handed operation. Top mounted spring balance loop. Easy to use forward/reverse switch and three position power regulator. Top venting exhaust. Oiling points for daily maintenance.

Specifications:
Free speed: 3,300rpm.
Final drive: 1" (25mm) hex.
Working torque: 2,030Nm (1500lb.ft.).
Maximum torque: 2,300Nm (1700lb.ft.).
Safe working pressure: 90psi (6.2bar).
Air inlet thread: 1/2" NPT.
Minimum air hose size (ID): 1/2" (13mm).
Air pressure: 90PSI (6.3Bar).
Air consumption: 0.7CFM.
Sound pressure level: 87dB(A).
Vibration level: 5.9m/s2.
Overall length: 500mm.
Weight: 9.34kg.

Kobe? 1" Drive Heavy-Duty Pistol Grip Air Impact Wrench

Front or rear mounting spring balance loop. Easy to use forward/reverse switch and 3 position power regulator. Forward facing exhaust. Oiling points for daily maintenance.

Specifications:
Safe working pressure: 90psi (6.2 bar).
Free speed: 3,400rpm.
Final drive: 1" (25mm) hex.
Working torque: 2,170Nm (1600lb.ft).
Maximum torque: 2,440Nm (1800lb.ft).
Air inlet thread: 1/2" NPT.
Minimum air hose size (ID): 1/2"(13mm).
Air pressure: 90PSI (6.3Bar).
Air consumption: 5.95CFM.
Sound pressure level: 87dB(A).
Vibration level: 5.9 m/s2.
Overall length: 295mm.

Kobe? Air Grinders

The Kobe? GD2206L one-handed type straight die grinder?s powerfully compact 1/2 HP motor delivers 22,000 precisely controllable rpm in the palm of your hand making it ideally suitable for polishing, buffing and grinding. The robust and durable single piece aluminium body houses the 1/2 HP motor and precision balanced bearings provide reliability in the most demanding of industrial/automotive applications. The trigger has a safety catch to prevent accidental starts.

Straight Die Grinder

Specifications:
Free speed: 22,000rpm.
Collet size: 6mm.
Air inlet thread: 1/4?? NPT.
Air hose size (ID): 10mm.
Air pressure: 90PSI.
Air consumption: 4CFM*
Overall length: 170mm.
Weight: 0.5kg.
Noise level: 93dB(A).
Sound power: 103dB(A).
Vibration: 5.4m/s.

*Based on a 15 second cycle per minute average use.

Kobe? Retainers

Suitable for use with all Kobe air hammers.

Beehive Type

Speed Ratches

R7722
Suitable for the removal and installation of threaded fasteners. Reversible hardened steel 1/4? square drive. Short body length allowing access into hard to reach areas. Planetary gears for longer life and smoother running. Low profile throttle for precise speed control. Rotating air inlet to prevent the air hose tangling.

Model number: R7722
Drive size: 1/4? (6mm).
Free speed: 200rpm.
Recommended air pressure: 6.2Bar (90PSI).
Air consumption:4CFM (113ltr/min).
Working torque range: 7 ~ 27nm (5 ~ 20ft/lbs).
Air inlet thread: 1/4? NPT.
Minimum air hose size (ID): 10mm (3/8?).
Noise level?: 80dBA.
Sound pressure/power level?: 88dBA.
Vibration level#: 1.8m/s2.
Overall length: 200mm.
Net weight: 0.65kg.

? Per Pneurop Standard EN ISO 15744:2002.
# Per EN 28927-1.

Action shots:
Spring loaded ball socket retainer.
Protective rubber head cover.
Lever operated throttle.
Directional rear exhaust.
Forward / Reverse lever switch.
Vibration dampened rubber grip.
Adjustable air (speed)regulator.

Kobe Speed Ratchet 1/4? Square Drive - 200RPM

Kobe? High Speed Mini Die Grinder

GD2806L
For precision engineer?s mould making etc. Safety lever throttle, front exhaust, ultra compact and lightweight.

Specifications:
Free speed: 25,000rpm.
Collet size: 6mm.
Air inlet thread: 1/4?? NPT.
Air hose size (ID): 10mm.
Air pressure: 90PSI.
Air consumption: 4CFM*.
Noise level: 94dB(A).
Sound power level: 103dB(A).
Vibration: 5.0m/s.
Overall length: 120mm.

*Based on a 15 second cycle per minute average use.