Kobe? Rapid Cutting Air Metal Shear

SH120
Produces burr free cuts without distortion. Ideal for body shop & sheet metal work. Teasing throttle for precise control.

Specifications:
1/4" NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
Cutting capacity: 1.2mm steel to 1.6mm aluminium.
Overall length: 200mm.

*Based on a 15 second cycle per minute average use.

Extended Straight Die Grinder 1/4" - 25,000rpm

B3555
Use for grinding, polishing, buffing and deburring. The extra length allows you to reach more confined areas. Reversible hardened steel 1/4" collet. Planetary gears for longer life and smoother running. Low profile teasing throttle for precise speed control. Rotating air inlet to prevent the air hose tangling.

Specifications:
Model number: B3555
Collet size: 1/4" (6mm), 1/8" (3mm).
Free speed: 25,000rpm.
Recommended air pressure: 6.2Bar (90PSI).
Air consumption: 4CFM* (113ltr/min).
Air inlet thread: 1/4" NPT.
Minimum air hose size (ID): 10mm (3/8").
Noise level: 91dBA.
Sound power level: 98dBA.
Vibration level: 4.53m/s2.
Overall length: 260mm.
Net weight: 0.68kg.

Kobe™ Extended Spindle Die Grinder

GES2506L
For extra reach in "hard to get at" areas, extended spindle housing allowing two-handed operation, rear exhaust, safety lever throttle.

Specifications:
1/4" NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
Overall length: 248mm.
Collet size: 6mm.

*Based on a 15 second cycle per minute average use.

Heat Gun Accessories

For soldering and for use with heat
shrinkable tubing. Made from
stainless steel.

Reflector Nozzle 30mm

Kobe? Scaler Needles (Set of 10)

For use with Kobe Needle Scaler NS4030 (illustrated).

Kobe? Retainers

Suitable for use with all Kobe air hammers.

Zip Change Type

Straight Continuous Use Die Grinder 1/4? - 25,000rpm

B3456
Use for grinding, polishing, buffing and deburring. Reversible hardened steel 1/4? collet. Short body length allowing access into hard to reach areas. Planetary gears for longer life and smoother running. Low profile teasing throttle for precise speed control. Rotating air inlet to prevent the air hose tangling.

Specifications:
Model number: B3456.
Drive size: 1/4? (6mm), 1/8? (3mm).
Free speed: 25,000rpm.
Air pressure: 6.2Bar (90PSI).
Air consumption: 4CFM* (113ltr/min).
Air inlet thread: 1/4? NPT.
Minimum air hose size (ID): 10mm (3/8?).
Noise level?: 91dBA.
Sound power level?: 98dBA.
Vibration level#: 4.53m/s2.
Overall length: 160mm.
Weight: 0.6kg.

? Per Pneurop Standards EN 12366.
# Per EN 28927-1.

Action shots:
Vibration dampened rubber grip.
Adjustable air(speed) regulator.
Lever operated throttle with safety clip.
Comes with 1/4? and 3/8? collet spanners.

Kobe? Air Nibbler Die

Produce burr free cuts without distortion. Ideal for body shop and sheet metal work. Suitable for use with Kobe NB160 high performance nibbler.

To suit Nibbler Model NB160. Cuts on downstroke.

Kobe™ Additional Collets

To suit Kobe and similar micro die grinders.

Kobe? Air Hammer Chucks

Suitable for use with all Kobe air hammers. Cannot accidentally be released.

Safety Chuck

Spring load retainer, that must be unscrewed to allow tool release.