Kobe 180mm (7") Heavy-Duty Angle Grinder

GA1807L
Supplied with front exhaust, safety lever throttle, auxiliary side handle and adjustable safety guard.

Specifications:
Free speed: 7000rpm.
Grinding disc size: 180x6.3x22.2mm.
Air inlet thread: 1/4?? NPT.
Air hose size (ID): 10mm.
Air pressure: 90PSI.
Air consumption: 6,1/2 CFM*
Overall length: 340mm.
Weight: 3.6kg.
Sound power level: 109dB(A).
Sound Pressure/ Noise level: 103dB(A).
Vibration level: 2.6m/s.

*Based on a 15 second cycle per minute average use.

Speed Ratches

SR375
Ball type retainer, disc type reversing action, compact, lightweight design, ideal for automotive work.

Specifications:
10mm bolt capacity.
1/4" NPT air inlet thread for 10mm air hose.
150rpm free speed.
90psi air pressure.
4CFM* air consumption.
50ft/lbs torque.
Front exhaust
Overall length: 255mm.

*Based on a 15 second cycle per minute average use.

Kobe Air Ratchet Speed Wrench (3/8?? Square Drive)

Kobe Air Tools

The Kobe RPP480 air riveter is a lightweight & powerful tool for blind riveting.
Easy maintenance.
Supplied complete with 2.4mm (3/32”), 3.2mm (1/8”), 4.0mm (5/32”), 4.8mm (3/16”) Nosepieces.

RPP480 Air Riveter

RPP480 Specification:
Recommended Air Pressure: 70-90psi.
Air Consumption: 4cfm (113L/Min)*.
Air Inlet Thread: 1&fras1;4” NPT.
Air Hose Size (Id): 10mm (3&fras1;8”).
Nosepiece Sizes: 2.4mm (3&fras1;32”), 3.2mm (1&fras1;8”), 4.0mm (5&fras1;32”), 4.8mm (3&fras1;16”).
Overall Length: 165mm.
Overall Height: 274mm.
Net Weight: 1.5kg.
* Based On 15 Second Cycle Per Minute Average Use.

Kobe IW500 1/2" Impact Wrench

The Kobe IW500 1/2" square drive air impact wrench is suitable for the rapid removal or installation of threaded fasteners. The housing is manufactured from a single piece of aluminium, for increased strength and durability. The housing has a rubber shroud around the square drive to protect the surface of the work piece from accidentally impacts and a rear bumper to protect the tool when it?s not in use. Reverse gear is selected easily at the press of a button conveniently located above the 10 position throttle control. The short body length allows access into hard to reach areas.

IW500 - 1/2" Impact Wrench

One piece aluminium housing, 10 position power regulator and thumb switch for reversing.

Specifications:
Bolt capacity: 16mm.
Torque: 325 Nm.
Air inlet thread: 1/4" NPT.
Air hose size (ID): 8mm.
Air pressure: 90PSI.
Air consumption: 4CFM*.
Overall length: 191mm.
Weight: 2.4kg.
Noise level: 88dB(A).
Vibration: 4.2m/s2.
For a complete range of 1/2'' drive impact sockets see product group KEN-583.

*Based on 15 second cycle per minute average use.

Kobe? Pistol Grip Air Hammer

HP4540
Suitable for use with cutters, punches, spot weld breakers and flat chisels. Supplied with retainer spring. Accepts all standard 0.401" shank tools.

Specifications:
1/4?? NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
Overall length: 145mm.
Stroke length: 40mm.

*Based on a 15 second cycle per minute average use.

Kobe? 10mm Reversible Pistol Air Drill

DPR1810
10mm Jacobs chuck, stall resistant, heavy duty bearings, thumb switch for reverse, suitable for screwdriving.

Specifications:
Spindle: 3/8?- 24.
Air inlet thread: 1/4?? NPT.
Minimum air hose size (ID): 3/8??(10mm).
Chuck capacity: 10mm.
Spindle thread: 3/8?? - 24.
Air pressure: 90PSI/6.3Bar.
Air consumption: 4CFM* (144 ltr/min).
Sound pressure level: 85 dB(A).
Sound power level: 101 dB(A).
Vibration level: 5.4 m/s2.
Overall length: 165mm.

*Based on a 15 second cycle per minute average use.

Kobe? Air Nibbler Punch

Produce burr free cuts without distortion. Ideal for body shop and sheet metal work. Suitable for use with Kobe NB160 high performance nibbler.

To suit Nibbler Model NB160. Cuts on upstroke.

Four point fixing suitable for securely fixing bench grinders to the wall. Manufactured from heavy gauge steel, all welded construction painted finish.
Each mounting plate
can accommodate various sizes of grinder base.

Grinder Pedestal Stand

Kobe™ Additional Collets

To suit Kobe and similar micro die grinders.

Kobe Bench Grinders

The Kobe GB200 bench grinder has a powerful 385W motor ideally suited to Industrial/workshop use.

Features include:
Robust construction with sturdy work supports.
Spark Deflectors.
Wheel guards.
Positive ON/OFF switch.
Supplied with one 36 Grit wheel and one 60 Grit wheel.

CE approved.

GB200 200mm (8”) Bench Grinder

GB200 Bench Grinder Specification:
Motor Supply Voltage: 230-240V/50Hz.
Power: 1/2HP.
Power Input: 385W.
Motor Speed: 2,800rpm.
Shaft dia: 22mm.
Grinding Wheel Diameter: 200mm (8”).
Grinding Wheel Width: 6-25mm.
Sound Power Level: 94dBA.
Sound Pressure: 72.2dBA.
Net Dimensions: 270x480x265mm (HxWxD).
Net Weight: 21.2kg.