18V Drill Driver

Standard Equipment
Charger, Batteries, Double Ended Bits
No Load Speed: H:0-1300rpm L: 0-400
Torque Settings S/H Nm: 16+ Drill
Max Torque: 37/42nm
Max in Steel: 13mm
Max in Wood: 36mm
Charging Time: 30min
Net Weight: 2.2kgs

6391DWP3

355mm (14") Abrasive Cut-Off Saw

Shaft lock. Double action safety switch. Quick release vice. Double insulated. Accessories include: Cut-off wheel, socket wrench, wheel arbor, inner flange, outer flange bolt and washer.

2414NB

Max. Cutting Capacity: 115mm. No Load Speed: 3,800rpm. Wheel Diameter: 355mm. Hole Diameter: 25.4mm. Power Input: 1,650W. Net Weight: 16.3kg.

Makita Batteries for Cordless Tools

Charger compatibility: DC1414F, DC1439, DC1822, DC1804F.

NiMh Batteries - ?Plug-In? Type

125mm (5") Angle Grinder

Very compact size with paddle switch, lightweight to reduce operator fatigue.
Power Output: 720W.
No load speed: 11,000rpm.
Bore size: 22mm.
Spindle size: M14 x 2mm.
Weight: 1.9kg.
Accessories: Side handle and wheel guard.

GA5034

Makita 230mm 2400W Angle Grinders

GA9040S
Specifications:
Wattage: 2,400W
No load speed: 6,600rpm.
Rotatable rear handle with ultra low vibration.
Wheel size: 230mm.
Bore size: 22mm.
Spindle size: M14 x 2mm.
Weight: 5.6kg.
Disc supplied separately.

Available in 240V or 110V.

18V Cordless Impact Wrench

Same fastening torque in forward and reverse rotations with full torque at 6 seconds after seating. Compact design provides more control and maneuverability. Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact. The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are joined with vibration absorbing cushion rubbers. The large bumper protects workpiece from scratches,increasing maneuverability. Ergonomically designed handle with rubberized soft grip provides more control and comfort. Easy-to-operate LED light for illuminated operation can be turned on or off with an independent switch, and features an over-discharge-protective circuit. Also features a hanging hook.

Capacity: Standard bolt:M12 - M22; High tensile bolt: M12 - M16
Impacts per minute: 2,200
No load speed: 1,600rpm
Maximum torque 440Nm
Dimensions (L x W x H) 266mm x 82mm x 290mm
Net weight: 3.4kg

Naked tool only - Batteries and Charger not supplied.

SDS Plus Rotary Hammer Drill

No load speed: 1100rpm
Drilling capacities: steel 13mm, wood 32mm, concrete TCT 28mm/Core 80mm
Joules: 2.9
Weight: 3.3kg

230mm (9") 2000W Angle Grinder

GA9020S
Specifications:
Wattage: 2,000W.
No load speed: 6,600rpm.
Spindle lock for fast and easy disc change.
Spindle size: M14 x 2mm.
Wheel Size: 230mm.
Weight: 4.7kg.
Supplied with: lock nut wrench, side handle and wheel guard.
Disk supplied separately.

Available in 240v and 110V.

115mm (6") Angle Grinder

Compact size with paddle switch for easy operation right or left handed. Lightweight to reduce operator fatigue. Spindle lock for easy accessory changes.
Power input: 720W.
No load speed: 11,000rpm.
Spindle thread: M14 x 2mm.
Disc bore size: 22mm.
Weight: 1.80kg.
Accessories: Wheel guard and side handle.

GA4534

SDS Plus Rotary Hammer Drill

Blows per minute: 4050bpm
No load speed: 1050rpm
Drilling capacities: concrete 22mm steel 13mm wood 32mm
Joules: 2.3Js
Weight: 2.5kg

Available in 240V and 110V, in models with chuck or keyless chucks.