Makita Batteries for Cordless Tools

Spare batteries offer the advantage of continuous tool use while original batteries are charging therefore increasing productivity. Particularly useful on repetitive tasks over long periods i.e. production lines, circuit board manufacturing. Nickel Cadmium (Ni-Cd) and Nickel-Metal Hydride (Ni-Mh) versions available.

NiMh Batteries - ?Plug-In? Type

Charger compatibility: DC1414F, DC1439, DC1822, DC1804F.

125mm (5") Angle Grinder

Very compact size with paddle switch, lightweight to reduce operator fatigue.
Power Output: 720W.
No load speed: 11,000rpm.
Bore size: 22mm.
Spindle size: M14 x 2mm.
Weight: 1.9kg.
Accessories: Side handle and wheel guard.

GA5034

Makita 230mm 2400W Angle Grinders

GA9040S
Specifications:
Wattage: 2,400W
No load speed: 6,600rpm.
Rotatable rear handle with ultra low vibration.
Wheel size: 230mm.
Bore size: 22mm.
Spindle size: M14 x 2mm.
Weight: 5.6kg.
Disc supplied separately.

Available in 240V or 110V.

Makita Battery Chargers for Cordless Tools

Li-Ion/Makstar Chargers. These chargers use a built-in memory chip in the battery and a chip in the charger to decide on the best charging method. Optimal charging is achieved by controlling current, voltage and thermal. Additional chargers used in conjunction with extra batteries also increase productivity, charging batteries while not in use. Particularly useful on repetitive tasks over long periods i.e. production lines, circuit board manufacturing.

DC24SC Battery Charger

Li-Ion/NiMH quick charger. 7.2 to 24V. 30 minute charge (3.0Ah battery).

230mm (9") 2000W Angle Grinder

GA9020S
Specifications:
Wattage: 2,000W.
No load speed: 6,600rpm.
Spindle lock for fast and easy disc change.
Spindle size: M14 x 2mm.
Wheel Size: 230mm.
Weight: 4.7kg.
Supplied with: lock nut wrench, side handle and wheel guard.
Disk supplied separately.

Available in 240v and 110V.

18V LXT Drill Driver Body ONLY

BDF453Z

Makita Batteries for Cordless Tools

Remaining power level indicator. Makita adaptor 193205-0 required.
Charger compatibility: DC18RA, DC18SE, DC24SC, DC24WA.

NiMh Batteries - ?Slide-On? Type

Makita Batteries for Cordless Tools

Charger compatibility: DC1414F, DC1439, DC1822, DC1804F.

NiCd Batteries - ?Plug-In? Type

115mm (6") Angle Grinder

Compact size with paddle switch for easy operation right or left handed. Lightweight to reduce operator fatigue. Spindle lock for easy accessory changes.
Power input: 720W.
No load speed: 11,000rpm.
Spindle thread: M14 x 2mm.
Disc bore size: 22mm.
Weight: 1.80kg.
Accessories: Wheel guard and side handle.

GA4534

355mm (14") Abrasive Cut-Off Saw

Shaft lock. Double action safety switch. Quick release vice. Double insulated. Accessories include: Cut-off wheel, socket wrench, wheel arbor, inner flange, outer flange bolt and washer.

2414NB

Max. Cutting Capacity: 115mm. No Load Speed: 3,800rpm. Wheel Diameter: 355mm. Hole Diameter: 25.4mm. Power Input: 1,650W. Net Weight: 16.3kg.