SIP Trade 24 Litre Portable Air Tank

06298 - Stand Alone
24 litre air receiver, a convenient and portable supply of stored air. Ideal for when it is not possible to use a compressor - just load the receiver and take it with you. Complete with pressure gauge.

09272

• 230v (13amp) supply
• Powerful 36,500 BTU/hr (10.7kW) heat output
• 245m3 (8652 cu.ft) approx. heating area
• Low 0.653kg/hr average gas consumption
• Rugged non-corrosive stainless steel casing for tough daily use
• Highly portable
• Made in Italy
• 2 Year Warranty
BADGES: Made in Italy, NEW, 2 year warranty, Stainless Steel, 13amp supply

SIP® Trade Airmate Nimbus 25 Compressor

06233
230v (13amp) supply.
Heavy-duty 2hp motor and pump for prolonged use.
24L air receiver.
8CFM piston displacement.
118psi (8bar) max pressure.
Efficient cooling system.
Oil lubricated.

SIP Professional proTECH Belt Drive Compressors

Professional belt drive. Two year warranty on all proTECH compressors. This range uses extra hard wearing slow running pumps with after coolers to provide resistance to wear and long lasting reliability. An oversized crankcase futher improves lubrication. These machines are ideal for heavy, continuous use - the right choice for professional and industrial applications. Slow running. Strong plastic belt guard. Big wheels - for better mobility around the workshop.

06282 Airmate PNB3800B3/150

Specifications:
3.0HP motor, 230V (16amp) supply.
150 litre air receiver.
Piston displacement 16.0CFM, max. pressure 10 bar.

Trade Medusa Generators

Compact and lightweight - ideal for caravans, boats and building sites. Quiet running (67dB(A)), two stroke engine. Three pin UK socket outlet, 12V DC battery charging facility (40Ah batteries). Complete with two stroke oil, battery charger, leads and clips, spark plug socket, screwdriver set, leads, clamps and measuring cup. One year warranty.

03920 Trade Medusa Compact T951

SIP Trade Bench Morticer

01942
An ideal entry-level morticer. Excellent build quality and easily transportable. Cast iron construction for accuracy and quality performance. Gas strut gives smooth action. Can be used as a bench drill. Adjustable rise and fall handle for maximum leverage. 2 year warranty.

Specifications:
Supply: 230v (13amp).
Motor: 370w (0.5hp).
Chisel capacity: 6-12mm (1/4" ?? 1/2").
Max chisel stroke: 76mm.
Table size: 340 x 250mm.
Chisel to fence: max 65mm.
Weight: 31kg.

SIP® Trade 2010FS Submersible Pump

06813
Portable and tough, this submersible pump, complete with float switch, is ideal for a wide variety of commercial and domestic pumping applications.

Specifications:
Supply: 230v (13amp).
Motor: 400w.
Float switch: yes.
Max. pumping head: 8M.
Flow rate: 150 l/min.
Max. particle dia: 5mm.
Cable length: 10M.
Weight: 4.7kg.

Medusa Full Frame Generators with Long Range Fuel Tanks

A best selling range of Honda GX powered generators with long range fuel tanks for extra long running times. All of these generators are fitted with heavy duty, maintenance free alternators. High fuel economy, fast, easy-pull starting. Low noise & vibration. Robust frame for protection and durability. High capacity fuel tank for extended running times. Hot spark electronic ignition. Low oil shutdown to prevent engine damage. Inclined cylinder and counter balance shaft to reduce vibration. Splash fed lubrication system. Cast iron cylinder sleeve to withstand wear. 230/115v sockets. Built in the UK. Optional LPG Conversion Kit - SIP Item 04495. One year warranty - engine covered directly by Honda.

04466 Professional MGHP2.5FLR

5.5HP Honda GX160 OHV engine. Continuous output 2.2KVA, maximum output 2.75KVA. 12 litre fuel tank, 9 hours approximate run time.

SIP Professional proTECH Belt Drive Compressors

Professional belt drive. Two year warranty on all proTECH compressors. This range uses extra hard wearing slow running pumps with after coolers to provide resistance to wear and long lasting reliability. An oversized crankcase futher improves lubrication. These machines are ideal for heavy, continuous use - the right choice for professional and industrial applications. Slow running. Strong plastic belt guard. Big wheels - for better mobility around the workshop.

06284 Airmate PNB3800B3/200

Specifications:
3.0HP motor, 230V (16amp) supply.
200 litre air receiver.
Piston displacement 16.0CFM, max. pressure 10 bar.

SIP Airmate Oil Lubricated Compressors

Oil lubricated for longer life, featuring heavy duty pump, cast iron barrel, industrial quality air filter, heavy duty non-return valves and twin threaded outlets and gauges. Tough plastic casing with integral handle providing protection and manoeuvrability. They run from a standard 230V domestic supply, making them ideal for DIY or trade users. The automatic stop/start control, pressure regulator and gauge make them safe and convenient to use. Efficient cooling system. Tanks conform to full EC directives. Compact in design, easy to store and ideal for powering: Air Brushes, Lower/Duster Guns, Air Caulking Guns, Air Degreasing Guns, Air Grease Guns, Inflating Guns, Air Nailer/Staplers, Air Riveters, Spray Guns etc.

Airmate TN 3/100-D

06244
Oil lubricated. 2.5HP induction motor, 230V, 50Hz (13amp) supply.
100 litre air receiver.
Piston displacement 9.5CFM, max. pressure 8 bar.