SIP Professional proTECH Belt Drive Compressors

Professional belt drive. Two year warranty on all proTECH compressors. This range uses extra hard wearing slow running pumps with after coolers to provide resistance to wear and long lasting reliability. An oversized crankcase futher improves lubrication. These machines are ideal for heavy, continuous use - the right choice for professional and industrial applications. Slow running. Strong plastic belt guard. Big wheels - for better mobility around the workshop.

06278 Airmate PB3800B/150S

Specifications:
3.0 hp motor, 230V (13amp) supply.
150 litre air receiver.
Piston displacement 14.0CFM, max. pressure 10 bar.

Professional Medusa Generators

A best selling range of Honda GX powered generators. All of these generators are fitted with heavy duty, maintenance free alternators. High fuel economy, fast, easy-pull starting. Low noise and vibration. Robust frame for protection and durability. High capacity fuel tank for extended running times. Hot spark electronic ignition. Low oil shutdown to prevent engine damage. Inclined cylinder and counter balance shaft to reduce vibration. Splash fed lubrication system. Cast iron cylinder sleeve to withstand wear. 230/115v sockets. Built in the UK. Optional LPG Conversion Kit - SIP Item 04495. One year warranty - engine covered directly by Honda.

04720* Professional MGHP6.0FE - Full Frame Electric Start

13.0HP Honda GX390 OHV engine, 6.5 litre fuel tank, 2.4 hrs approx. run time. Continuous output 6.0KVA, max output 7.2KVA. *Electric start.

SIP Professional proTECH Belt Drive Compressors

Professional belt drive. Two year warranty on all proTECH compressors. This range uses extra hard wearing slow running pumps with after coolers to provide resistance to wear and long lasting reliability. An oversized crankcase futher improves lubrication. These machines are ideal for heavy, continuous use - the right choice for professional and industrial applications. Slow running. Strong plastic belt guard. Big wheels - for better mobility around the workshop.

06288 Airmate PNB3800B4/200

Specifications:
1 phase 4.0HP motor, 230V (16amp) supply.
200 litre air receiver.
Piston displacement 18.0CFM, max. pressure 10 bar.

SIP Professional proTECH Belt Drive Compressors

Professional belt drive. Two year warranty on all proTECH compressors. This range uses extra hard wearing slow running pumps with after coolers to provide resistance to wear and long lasting reliability. An oversized crankcase futher improves lubrication. These machines are ideal for heavy, continuous use - the right choice for professional and industrial applications. Slow running. Strong plastic belt guard. Big wheels - for better mobility around the workshop.

06279 Airmate PB3800B3/200S

Specifications:
3.0HP motor, 230V (13amp) supply.
200 litre air receiver.
Piston displacement 14.0CFM, max. pressure 10 bar.

09276

• 230v (13amp) / 110v supply
• Adjustable 106,995 – 226,000 BTU/hr
(31.4 – 66.2kW) heat output
• Maximum 1574m3 (55,585 cu.ft) approx. heating area
• Low 2.097 – 4.268kg/hr average gas consumption
• Rugged non-corrosive stainless steel casing for tough daily use
• Made in Italy
• 2 Year Warranty
BADGES: Made in Italy, NEW, 2 year warranty, Dual Voltage, Stainless Steel

Trade Medusa Generators

Compact and powerful, with integral carrying handle. Quiet running (72dB(A)), four stroke engine. Low oil shutdown. Three pin UK socket outlet, 12V DC battery charging facility. One year warranty. 5.5 litre tank, 8hrs running time, quiet running, four stroke engine, maximum output 1000W. Complete with two stroke oil, battery charger, leads and clips, spark plug socket and screwdriver set.

04739 Trade Medusa Compact T1000

SIP 410mm (16") Professional Heavy-Duty Bandsaw

01445
Specifications:
Powerful 3HP motor 230V, 2.2kW.
Throat width: 410mm.
Large tilting table: 10-45.
Table size: 535 x 435mm.
Table height: 900mm.
Table width: 6-37mm.
Table length: 3345mm.
Saw blade speed: 7 or 14m/sec.
Supplied with blade: 3345 x 12mm x 6TPI.
Max cutting depth: 254mm.
Supplied with floor stand.
Two year warranty.
Weight: 126kg.

Trade Medusa Generators

A powerful 6HP, full frame generator. 1x 230V, 1x 110V AC sockets and 12V DC socket. Four stroke OHV air cooled engine, maximum output 2.8KVA. Low oil alert. Low noise. 15 litre long range tank, 11hrs running time. Optional wheel kit available. One year warranty.

03922 Trade Medusa T2801

Sip Machine Tools

The Sip 300mm (12") professional metal cutting bandsaw is powered by a 750w (1hp)induction motor and is ideally suited for general workshop use.

Features include:
Adjustable vice for cutting mitre angles between 0-45°.
Cast iron bow for reduced vibration & accuracy.
Limit switch to stop machine when cutting is complete.
Blade included.

300mm (12") Metal Cutting Bandsaw - 3 Phase

01539
Supply 400V-3ph.
Motor 1hp (750w)
Speed range (4 speeds): 110/133/192/318 ft/min.
Max. blade size: (L)2360 x (W)20mm.
Mitre angle 0-45° left.
Cutting capacity @90°:
Box section 180 x 210mm,
Round section diameter: 180mm.
Cutting capacity @45°:
Box section 180 x 110mm,
Round section diameter: 110mm.
Weight 137kg.

Trade Medusa Generators

15 litre long range tank, 3hrs running time. 2x 230V AC three pin UK sockets and 12V DC socket. 5HP four stroke OHV air cooled engine, maximum output 2.4KVA. Low oil alert. Low noise. Optional wheel kit available. One year warranty.

03921 Trade Medusa T2401