Anvils, Indentors & Test Blocks

To suit Oxford hardness tester.

Steel Ball Bearing Indentor

Digital Indicators

These precision made digital indicators offer affordable accuracy, a standard data output interface with metric/inch interchange at any point tracing a maximum/minimum value.

Type IDM

This Multi-function Digital Indicator has accuracy of 0.001mm/0.00005", Inch/Metric Conversion, Zero reset, Data hold, Min.Max Display, Fast display, Auto power off & SPC compatability.

Oxford Precision™ Granite

Precision granite products are manufactured to the highest quality standards to provide an accurate surface from which final measurements can be taken. More dimensionally stable than steel or cast iron, with a low thermal expansion co-efficient. Does not burr, is corrosion free and easy to maintain.

Parallels

Used for setting up work on machine tables and surface plates. Sold in pairs. Manufactured to BS906 : Part 1 : Grade B for flatness, parallelism of working faces. Supplied with UKAS certificate.

Large Diameter Type - 36.2mm Diameter Face

Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.

Series 513

Standard Type - Clock Only

Hand Held Tachometer Kits

Accessories include Measuring Discs, Tip, Funnel, Extension Shaft and Adaptor.

Accessories

Grade 2-For workshop use.

Manufactured to BS EN ISO 3650. Available in two grades.

Knife Edge Vernier Calipers

Give 4 types of reading, internal, external, depth and step. Dual reading scale (metric and inch) with 14 bevelled vernier scale for reduced parallax reading error, fine adjustment assembly and knurled locking nut. Manufactured from hardened stainless steel for rigidity with satin finish. Conform to DIN 862. For quick accurate setting of all three axes (X, Y, Z) by analogue differential indicator. Suitable for all machine tools with CNC, NC, DRO and also for EDM/spark erosion tools. Universal - one tool measures length, height, diameter and centre. No calculations and no 'trial and error' involved. Increses production and efficiency, reduces job time and operator requirement. Pre-adjusted to a concentricity of 0.01mm maximum.
Indicator diameter: 50mm.
Clamping shank diameter: 20mm.



For taking 4 types of measurement, internal, external, depth and step. Dual reading scale (metric and inch) Universal - one tool measures length, height, diameter and centre. No calculations and no ?trial and error? involved. Pre-adjusted to a concentricity of 0.01mm maximum. Indicator diameter: 50mm. Clamping shank diameter: 20mm.

Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

Go

BSW - Medium Class Tolerance

Pyrex Media-lab Bottles

Bottles complete with cap and pouring ring. Complies with ISO 4796. Ideal for mixing and storage of culture medium. Wide neck for easy filling. Sloping shoulders for smooth pouring action. White graduations and marking spot. Manufactured from temperature and chemically resistant borosilicate glass. Supplied with light blue coloured polypropylene cap. Neck fitted with pouring ring for drip-free performance. Withstands steam sterilisation or dry heat up to 140C. Never autoclave bottles with a fully tightened screwcap. Always slacken off. Failure to follow this procedure can lead to breakage of the bottle.

Available in 25ml*, 50ml, 100ml, 250ml, 500ml and 1000ml capacities, in singles or in packs of 10. Other sizes on request.

*This small bottle features a glass lip and does not require a pouring ring.

Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

No Go

UNC - Class Tolerance 2A