Moore & Wright IP54 Water Resistant Calipers

MW110-30WR:
Capacity: 0-300mm/12".
Resolution: 0.01mm/0.0005".
Jaw length: 60mm.

Features:
Water and dust resistant to IP54 specification.
Functions: mm/inch conversion, on/off, zero setting.
Patented ceramic capacitive sensor.
Large LCD display.
CR2032 battery.
Complies with DIN862.

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Plunger Type Dial Test Indicators

Precision plunger dial indicators are suitable for various applications in the workshop or inspection department. All units are supplied with 8mm stems, 3mm diameter carbide ball anvil and standard offset lug backplate.
Accuracy: resolution down to 0.001mm. Calibration certificate supplied with all indicators reading better than 0.1mm.

FM-4 Graduated 0.002mm, 5mm travel, duel scale 0-20/ 0-10-0.

FM/FI Series

Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

No Go

Metric Coarse - Class Tolerance 6G

Dial Calipers

Rack covers prevent dust from fouling teeth of racks. All measuring faces are precision ground and micro lapped for absolute internal, external, depth and step readings. Manufactured to DIN 862.

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Double Ended Go & No Go

Metric Fine - Class 6H Tolerance

Oxford Precision? Vee Blocks

Are matched and numbered pairs of closed grained iron castings accurately machined. Precision 90 vee blocks. Supplied as a pair.

Digimatic Depth Gauge

Designed for measuring the depth of holes, narrow grooves and steps. Provided with data output for SPC systems. Uses IDC Digimatic Indicator. Both models supplied with 4 rods. Power supply: Batteries 2 off SR44 (PAN-904-5020K). Resolution: .0005"/0.01mm.

Series 547 "ABSolute"

Moore & Wright Depth Gauge Micrometers - Mechanical

Comply with BS6468.

892 Series

Interchangeable depth rods, 4mm diameter.

Depth Base Attachment

Suitable for 100mm (4") to 300mm (12") vernier and dial calipers with a depth measuring bar. Finely ground base surface and secure locking clamp.