Infrared Thermometer

Designed with on-the-job needs in mind, Fluke 62 MAX and 62 MAX+ infrared thermometers are everything you’d expect from the experts in measurement tools. Small in size, extremely accurate and very easy to use. IP54 rated for dust and water resistance.

Specifications:
Temperature Range: -30°C to 650°C (-22°F to 1202°F)
Accuracy: ±1.0°C or ±1.0% of reading, whichever is greater
-10 °C to 0 °C: ±2.0
-30 °C to -10 °C: ±3.0
Response Time: <300 ms (95% of reading)
Spectral Response: 8 to 14 microns
Emissivity 0.10 to 1.00
Optical Resolution: 12:1 (calculated at 90% energy)
Repeatability of Readings: ±0.5% of reading or <±0.5 °C (1°F), whichever is greater
Battery: AA x1
Battery Life: 8 hours with laser and backlight on

Physical Specifications:
Weight: 255g
Size: 175 x 85 x 75mm
Operating Temperature: 0°C to 50°C (32°F to 122°F)
IP Rating: IP 4 per IEC 60529
EMC: EN 61326-1:2006 EN 61326-2:2006
Compliance: EN/IEC 61010-1: 2001
Laser Safety: FDA and EN 60825-1 Class II

62 Max+ Infrared Thermometer

Micromaster "Easy" Digital Micrometer

0-30mm measuring spanSingle function keyIP40 protection against dustSuited plastic case0.001mm/0.00005in scaleMm/in conversionLarge easy to read 7mm displayTungsten carbide tipped anvilssupplied with SCS calibration certificate (equivalent to UKAS). Supplied in plastic case



Digital micrometer with 30mm measuring span. IP40 protection against dust, mm/in conversion, 0.001mm/0.00005in scale, Tungsten carbide tipped anvils. Supplied in suited plastic case.

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Etalon Basic Micrometer

High quality Tungsten cabide tipped micrometer with heat insulated handle. 0.01mm analogue scale

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Double Ended Go & No Go

Metric Coarse - Class 6H Tolerance

Oxford Precision? Angle Plates

Manufactured from close grained cast iron. BS : 5535 Grade B.

Webbed End

Webbed slotted angle plates can be used for rapid mounting fixtures for machine set-up, layout, or inspection.
They are heavily ribbed for strength and rigidity.
Sides and ends are machine finished.

Micrometer Heads

Spindle Diameter: 6.35mm - Tungsten Carbide Tipped. Spindle Housing Diameter: 10mm. Spindle Pitch: 1mm/.025mm. Main Body Diameter: 18mm. Overall length: 109mm. Accuracy (full scale): Metric: /-2 mu m Imperial: /-0.0001"

Series 150

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended Go

Metric Coarse - Class 6H Tolerance

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended No Go

Metric Coarse - Class 6H Tolerance