Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Short Series

Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Long Series

Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.

York? Nylon Finishing Wheels

Made from high quality nylon, which is both flexible, durable and does not clog as easily as standard abrasive. 6mm shank diameter. Alternate flaps of abrasive and interleaved with a versatile high quality nylon. Ideal for: matching/blending a finish, light deburring, decorative/cosmetic applications, on most materials, rust removal and blending. Available in a choice of Coarse, Medium, Fine and Very Fine Density Grades and in sizes 50 x 25mm, 50 x 50mm, 76 x 50mm and 100 x 50mm.

Nylon Finishing Wheel 76 x 25mm

Ideal for: Matching/blending a finish, light deburring, decorative/cosmetic applications.

DeWALT DCB105 Li-ion XR Battery Charger

Charger for 10.8v, 14.4v and 18v XR batteries - 1.5ah or 3ah.
Charges XR Li-Ion DEWALT 10.8V, 14.4V, 18V slide pack batteries.
Charges 1.5Ah battery pack in 30mins.
DEWALT 2 stage charging system.
Diagnostics with bright LED indicator communicates battery charge status: charged, charging, power problem, and battery too hot or too cold.
Intelligent charger varies charge rate according to battery type to increase battery pack life.

Charging current: 4.0A.
Charging Time: 30(1.5Ah)min.
Width: 120mm.
Height: 90mm.
Longueur: 180mm.
Weight: 0.49kg.

100mm (4") Heavy-Duty Angle Grinder - CP-854

Aluminum alloy housing, spiral bevel gearing, removable dead handle and a powerful 6hp high performance motor. Supplied with auxiliary side handle, lightweight and compact, 1/4" NPT air inlet thread, for 10mm air hose. 90PSI air pressure, 6CFM* air consumption, 3/8"- 24 spindle thread and an overall length of 229mm.

CP854E 125mm (5") Angle Grinder

*Based on a 15 second cycle per minute average use.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

60mm Dia x 20mm Height 10,200 MOS (rpm)

3M Aluminium Zirconia Fibre Discs

581C
A fit for purpose fibre disc for heavy, medium and light grinding applications. Good performance and a consistent quality finish. High performance alumina zirconia (AZ) mineral bonded to a vulcanized fibre backing. Conveniently packaged with 50 discs on a re-usable disc-holder clamping system, for easy storage and retention of disc shape and form. Good performance on stainless and mild steel as well as other ferrous and non-ferrous materials. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

125mm Diameter x 22mm Bore (Max 10,000rpm)

Electrical Cable

Plain annealed flexible copper conductors with low temperature, PVC insulation, low temperature PVC outer sheath.

Available in a choice of diameters and lengths.


3 Core Electrical Cable

Cubitron™ Fibre Sanding Discs

Cubitron™ II Fibre Discs are made with revolutionary 3M precision shaped ceramic grain technology, engineered with ultra-sharp, fast-cutting points that wear evenly, run cool and optimize mineral breakdown to maximize disc life.
Get more productivity, throughput, disc life, comfort and grinding speed.

NiCad Batteries - Flat

2607335037 9.6V 1.5Ah AL2422DC, AL2425DV, AL2450DV, AL2498FC