Norton Straight Wheels For Surface Grinding

AVS: Aluminium oxide abrasive used on all ferrous materials including mild steel, carbon steels and wrought irons. CVS: Silicon catbide abrasive used on non-ferrous materials that includes copper, aluminium, stone and cemented carbides. 38A: Sharp, friable aluminium oxide abrasive used for grinding hard, heat sensitive steels. Well suited for cylindrical, surface and internal applications.



(Type 1) In a choice of Medium or Soft.

10.8V Cordless Drill Driver

Electronic Cell Protection (ECP) prevents battery overload and switches off to avoid the threat of overheating and prevents battery discharge. Powered by a Lithium-Ion 10.8V battery. No Memory effect, no self discharge. 30min charger with turbo-charge to charge your battery to 70% in just 15 minutes. Supplied with 2 batteries, battery charger and water resistant carry case.

Specifications:
No load speed: 0 - 400rpm.
Torque adjustment range: 2 - 6Nm.
Max. torque: 18/7Nm (for hard/soft screwdriving appliction according to ISO 5393).
Max. screw diameter: 6mm.
Weight: 800g.

GSR108LI

York Grinding Wheels

Vitrified bond for precision grinding. Unaffected by water, acid and oils. All 1,1/4?? bore, supplied with 1??, 7/8??, 3/4??, 5/8?? & 1/2?? bore nylon bushes. Tough general-purpose aluminium oxide which is hard wearing. Used for surface and off hand grinding. Refined aluminium oxide with a faster grinding operation. Suitable for high speed steels, precision grinding and general surface grinding. Silicon carbide, used on low tensile strength materials, non ferrous metals and carbide tool grinding. All York grinding wheels are supplied in a unique storage box, which helps prevent chipping and other accidental damage. Spare cases available on request.

3" Bore

Ceramic Abrasive Flap Discs

'JET Ceramic' ceramic abrasive discs with intergrated M14 adaptors for quick mounting and reinforced glass fibre backing with 'cooling slots' for air-cooling. For use on steel and stainless steel.

J-AK

Canning-Lippert General Finishing Bar

Primarily for polyester and nitro-cellulose lacquers. Good general-purpose composition for producing a high gloss on most plastics.

1635-007 Vonax

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.
N.B. - 3mm Shank

Cylindrical Ball Nosed

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Ball Nosed

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

NiCad Batteries - O-Type

2607335676 12.0V 2.4Ah GML24V/VCD, AL2422DC, AL2425DV, AL2450DV, AL2498FC

Evolution Saw Blades

Evolution saw blades are manufactured to the highest specification. Hardened blade body ensures the blade runs truer for longer. TCT tooth configuration enables fast efficient cuts. High grade carbide teeth, offering increased durability.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

60mm Dia x 40mm Height 10,200 MOS (rpm)