Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 6mm

Shape W192. Grade: RA80. Diameter: 16mm. Length: 6mm. Max. rpm: 61,000. Weight per 10: 140g.

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Zirconium Grade Aluminium Backed (For Stainless Steel)

127mm Dia x 22mm Bore 12,000 MOS (rpm).

Heat Gun Accessories

For deflecting heat away from heat
sensitive material or panes of glass
when stripping window frames.
Made from stainless steel.

Window Nozzle 50mm

Multi-Sharp 2-in-1 Knife & Scissor Sharpener

Sharpens knives, cleavers, mezzalunas and pen knives as well as left or right hand scissors. Tungsten carbide sharpening heads that quickly restore a really sharp edge right to the tip.

K2 Car Pressure Washer

240V universal motor. Standard wash brush, trigger gun and foam nozzle.
Power: 1.4kw.
Max rated pressure: 110bar.
Max. water flow rate: 360ltr/hr.

K2 Premium Car Pressure Washer

Hose length: 6m.

DeWalt Angle Grinders

The electronic variable speed control of the DeWALT D28117 angle grinder offers added tool control and enables the tool to be used at optimum conditions to suit the accessory and material. Autobalancer reduces vibration resulting in greater comfort.

Features include:
Electro-mechanical clutch reduces the "kickback" transmitted to the operator if the cutting disc jams.
No volt release switch will prevent the unit starting when plugged in, even if the switch is in the on position. Switch must be consciously reset before power is delivered.
Overload protection will prevent the unit over heating by shutting the unit off until the unit has cooled down.
Dust ejection system removes majority of debris from the air which passes over the motor, preventing abrasion and tracking.
Anti vibration side handle to improve user comfort.
Guard design allows guard fitment, adjustment or removal without the use of tools, for increased flexibility.
Fully leaded stator windings for increased motor durability.
Pop off brushes protect the armature from damage at the end of brush life resulting in greater motor durability.
Small girth allows comfortable gripping resulting in superior ergonomics.
The low profile gear case allows access in confined areas.
Abrasion protected motor for increased motor durability.
Anti lock flange prevents flanges from permanently locking up and locking the disc on.
One piece brush arm prevents brush hang up in extreme conditions.
Side positioned spindle lock gives greater protection to button when using in confined spaces.

Supplied complete with:
Protective keyless guard.
Multi position anti vibration side handle.
Inner and outer disc flanges.
Pin Spanner.

Available as:
110v Order Code: DEW-272-2814K.
240v Order Code: DEW-272-2814R.

D28117 115mm (4 ½’’) Angle Grinder 1,100W

DeWALT D28117 Angle Grinder Specification:
Power Input: 1,100W.
No Load Speed: 2,800-10,000rpm.
Max. Disc Diameter: 115mm.
Spindle Thread: M14.
Weight: 2.5kg.
Length: 315mm.
Height: 90mm.

Hand/Arm Vibration – Grinding: 5.6m/s².
Hand/Arm Vibration – Sanding: 1.5m/s².
Uncertainty K 1 (Vibration): 3.5m/s².
Uncertainty K 1 (Vibration): 1.5 m/s².
Sound Pressure: 89dB(A).
Uncertainty K 1 (Sound): 3dB(A).
Acoustic Pressure: 100dB(A).
Uncertainty K 2 (Sound): 3dB(A).

Rotabroach Mini Cutters

For perfect holes in sheet metal, pipes & plastic. Cut clean, burr-free holes in seconds with new Roatabroach Mini-Cutters, the professional solution to holemaking in sheet metal, pipes and plastics. Mini-Cutters produce holes by removing a 'disc' of metal and have precision ground teeth and flutes to rapidly remove waste material, so they are fast, smooth and highly accurate. Now they come with a new and more aggressive tooth geometry to give high higher performance and longer cutting life on stainless steel and other difficult materials. No toolbox is complete without Mini-Cutters for clean, precise and effortless holecutting every time. Over 3 times faster than twist drills Mini-Cutters have multiple teeth and an annular
cutting action with no 'dead centre' area as with a twist drill. It means that less pressure is required to make the hole, so there is less risk of deforming sheet metal. This highly efficient cutting action also ensures minimal burring on breakthrough, reducing or completely eliminating the need for additional finishing work. Last up to 300 times longer than hole saws Holesaws have stamped teeth which only remove
small particles of metal with each revolution whereas Mini-Cutters are precision ground cutting instruments which slice their way through sheet metal without leaving burrs or jagged edges. Because they are made from M2 High Speed Steel,
they retain their sharpness to give a longer, more reliable cutting life over thousands of holes.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

50mm Dia x 40mm Height 12,300 MOS (rpm)

Wet/Dry Vacuum Cleaner - 1000W

Commercial wet and dry use vacuums, full plastic construction. Swing handle supplied with comprehensive accessory kit.

WV470 - 27ltr

Suction: 2100mm. Capacity Dry/Wet: 27/20 litres. Cleaning Range: 23.2m. Size: 358 x 450 x 700mm