York? Adhesive Backed Discs

Adhesive backed aluminium oxide paper discs requiring no tools to change the disc, when the abrasive becomes worn or a different grit is needed just peel off and apply a fresh disc, reducing machine downtime therefore increasing productivity.

Hole Pattern: 600A. 6 Hole

Diameter: 150mm.

DeWalt® 1100W MPP Pistol Percussion Drills

DWD524KS
High performance in demanding applications. With maximum productivity from innovative mode selector and metal keyless chuck offering fantastic bit retention. 2-speed variable. 13mm keyless chuck. Lock-on switch. All-metal gearbox. Rubber-coated grip. Anti-vibration side handle. Mechanical safety clutch.

Specifications:
1100W.
Max. drilling capacity: masonry 20mm, wood 40mm, steel 13mm.
No load speed: 0-1200/0-3500rpm.
Overall length: 370mm.
Weight: 2.8kg.
110V version includes plug.
Includes heavy-duty carry case.

Available in 110V and 240V.

Kennedy® Velcro-Backed Sanding Discs

No spanners required to change discs. 100% of sanding disc can be used, material removal rate is therefore increased. Can be repeatedly removed and re-applied again and again. Unaffected by dust or moisture. Aluminium oxide abrasive "resin-bonded over resin" to Velcro backed paper suitable for wood, plastics, ceramics etc.

Hole Pattern: 800A. 8 Hole

Diameter: 115mm. (To suit PEX 115, PEX 9.6, Kress) dust extraction type.

3M 245 Hookit™ Discs

Stiff E-weight paper gives a strong backing and long product life. Resin bond resists heat to prevent premature "burning". For initial and intermediate sanding on solid wood furniture, wood and metal door frames and other hard and soft wood, plastic and metal surfaces.
Use on: Wood, Metal, Paints, Fillers, Plastics.
Mineral: Aluminium Oxide.
Backing: E Weight Paper.
Coating: Open.
Bond: Resin.

Plain (no holes)

Diameter: 150mm.

Makita 230mm 2400W Angle Grinders

GA9040S
Specifications:
Wattage: 2,400W
No load speed: 6,600rpm.
Rotatable rear handle with ultra low vibration.
Wheel size: 230mm.
Bore size: 22mm.
Spindle size: M14 x 2mm.
Weight: 5.6kg.
Disc supplied separately.

Available in 240V or 110V.

Hitachi Li-Ion Batteries

Much higher capacity than even NiMH. Charge loss during storage is less than half that of NiCad. No memory at all, no periodic conditioning is needed.

EBM315 Battery 3.6V 1.5Ah Li-Ion

Charger compatibility: UC3SFL, UC18YRL/J0, UC24FYA and UC14YFA.
N.B. Picture is for illustrative purposes only. Actual product may vary in appearance.

York? Drum Holders

Suitable for use with chucks/collets on all portable power and air tools. For use with spiral bound abrasive sanding bands. Self expanding when in use for a secure grip on the band. All shanks are 6mm except where marked * which has an 8mm shank.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

60mm Dia x 30mm Height 10,200 MOS (rpm)

SIP Professional proTECH Belt Drive Compressors

Professional belt drive. Two year warranty on all proTECH compressors. This range uses extra hard wearing slow running pumps with after coolers to provide resistance to wear and long lasting reliability. An oversized crankcase futher improves lubrication. These machines are ideal for heavy, continuous use - the right choice for professional and industrial applications. Slow running. Strong plastic belt guard. Big wheels - for better mobility around the workshop.

06286 Airmate PNB3800B4/150

Specifications:
1 phase 4.0HP motor, 230V (16amp) supply.
150 litre air receiver.
Piston displacement 18.0CFM, max. pressure 10 bar.

1/2" IMPACT WRENCH COMPACT

CP7739
Lightweight, balance and power. 1/2” compact impact wrench. Twin hammer clutch. Composite handle and magnesium clutch housing. S2S technology and three positive power settings. Full power in reverse up to 450ft.lbs (610Nm). Lightweight and low noise level tool. Maximise operator comfort with an extremely well balanced tool. Most convenient and unique reverse technology in the market.

Output drive: 1/2”.
Free speed: 9,900rpm.
Working torque range: 68 - 414Nm.
Maximum torque: 610Nm.
Average air consumption: 5cfm.
Air consumption @ load: 20cfm.
Air consumption @ load: 9.4l/s.
Air inlet NPTF: 1/4.
Sound pressure: 92dBA.
Vibration a (ISO-28927-2): 6.9m/s2.
Vibration K (ISO-28927-2): 2.5m/s2.
Length: 163mm.
Weight: 1.2kg.