Kennedy® Sharpening Stones

Silicon Carbide man-made abrasive with very hard, sharp particles. This makes it ideal for non-ferrous metals, hard surfaces, alloys and cemented carbides. Also used on stone, marble, glass and plastics. A superior abrasive that is able to penetrate and cut quickly with only light pressure being applied.

3 Square Silicon Carbide

A range of tough general-purpose sharpening stones able to give keen, even cutting edges on all straight edge cutting tools. Consistent and uniform cutting edges ensure fast cutting and longer tool life.

Industrial Glue Gun

Used for a wide range of industrial and manufacturing applications.

SIA Fibre Discs

4819
Tough durable Zirconia grain with grinding aid to reduce heat build up and glazing. Strong fibre backing to give maximum grain support on arduous applications. Excellent life and cut to reduce down time and consumable costs, ideal for mild and stainless steel applications. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 180mm.

100mm Diameter x 16mm Bore (Max 12,000rpm)

Desoutter Air Turbine Grinder

05X
Specifications:
1/8" BSP air inlet for 5mm air hose.
90PSI air pressure.
75W motor.
3mm collet supplied as standard. Other collet sizes available on request.
Overall length: 171mm.

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Short Series

Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.

Kennedy® Linisher Belts

Resin Bond Aluminium Oxide Sanding Belts are designed for industrial applications. Durability combined with flexibility ensures a long life and first class performance. Suitable for wood and metal work.



25mm (1") Wide x 1065mm (42") Long.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'B' Shape. Shank Diameter 3mm

Shape B93. Grade: RA120. Diameter: 5mm. Length: 5mm. Max. rpm: 100,000. Weight per 10: 20g.

Bosch Progressor T-Shank Jigsaw Blades (5 Pack)

Application: Softwood 2-65mm, chipboard, wood core plywood, and fibre boards. Ground & taper ground teeth. Effective length: 91mm. Pitch 2.0 - 3.0 progressive.

Carbon Steel For Wood & Plastics (Pack 5)

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'B' Shape. Shank Diameter 3mm

Shape B124. Grade: RA120. Diameter: 3mm. Length: 3mm. Max. rpm: 100,000. Weight per 10: 20g.

Kennedy® Extension Cables for Site Use

Waterproof spring loaded socket caps. Available as 1.5mm2 core cables rated to 16A over six hours and 2.5mm2 core cables rated to 32A over six hours (except KEN-282-2400K, rated at 16A). Plugs and sockets conform to BS 4343 : 1968.

110V 1.5mm Core