Ajax Belt Grinders

Ajax Arboga Belt Grinders are designed for continuous heavy-duty grinding.The machines are built to a high quality and strong design. The equipment is fitted with adjustable tool rest, eye shield and motor protection.

These heavy-duty machines run at noise levels of below 80dBA. The design enables quick belt change and alignment, a flat guarded grinding area and a pivoting eye shield. For full details please contact your local branch.

Standard features
Emergency stop switch.
Adjustable eye shield.
Adjustable tool rest.
No volt release.
Large grinding area.
Prepared for dust extraction.
5 year motor guarantee.
No load speed: 28rpm (30m/sec).
Contact wheel diameter: 200mm.
Model designated ?X? have dust extraction included.
Available with optional items:
2 speed motor, cyclone dust extraction filter, increased hp, varying hardness of contact wheels.

Arboga Belt Grinders

Model Number: Ajax 150
Dust Extraction: No
Motor Rating: 4.8hp
Belt Size: 150x2000mm
Weight: 139kg

Norton? Aluminium Oxide Rolls

In a useful dispensing pack with a perforated edge to facilitate cutting to required size, these high quality aluminium oxide rolls are ideal for a range of hand-sanding jobs where greater flexibility is required.

Rolls

Roll size: (W)25mm x (L)25 Metres. Available in several grades.

Engis Hyprez Oilstones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Hyprez H.Y. Semi-Hard Aluminium Oxide

Oil filled, this stone is designed to minimise loading. Length: 150mm.

Kennedy® Velcro-Backed Sanding Discs

No spanners required to change discs. 100% of sanding disc can be used, material removal rate is therefore increased. Can be repeatedly removed and re-applied again and again. Unaffected by dust or moisture. Aluminium oxide abrasive "resin-bonded over resin" to Velcro backed paper suitable for wood, plastics, ceramics etc.

Plain (No Holes)

Diameter: 125mm.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 6mm

Shape W238. Grade: RA46. Diameter: 38mm. Length: 38mm. Max. rpm: 15,000. Weight per 10: 1110g.

Kennedy® Linisher Belts

Resin Bond Aluminium Oxide Sanding Belts are designed for industrial applications. Durability combined with flexibility ensures a long life and first class performance. Suitable for wood and metal work.



25mm (1") Wide x 1065mm (42") Long.

Kennedy® Buffing & Polishing Foams

Ultra soft reticulated foam for final polishing/finishing. Designed to allow free flow of air.

Red Final Polishing Foam Buffing Pads

Freud Circular Saw Blades

Anti-kickback Design: Kickback is caused by over-feed. It happens so quickly it can be impossible to react before injury occurs. On a table saw the wood is thrown back violently, on a radial arm saw the blade climbs quickly out of the cut and on a hand held saw the saw is pushed out of the cut. Freud's design reduces this. Each tooth is followed by a limiter, which restricts bite to the maximum safe amount. Teflon Coating. Resistant to friction and heat build-up. Teflon coated blades last longer, cleaning is easy and the distinctive coating also gives rust resistance.Whisper Quiet Expansion Slots: A question-mark shaped slot allows for the necessary expansion yet reduces noise. Laser Cut, High Strength Bodies: The use of precision lasers to avoid unwanted stress in the metal. The method also allows the use of higher strength steel (40 to 45 Rc). These bodies remain true, even after years of use. Tensioned Blades for Superior Flatness: Pre-tensioned blades ensure years of smooth operation. The process is computer controlled and was designed and built by Freud. Advanced Tri-Metal Tip Brazing: Copper alloy is sandwiched between layers of silver alloy (Copper is soft and will stretch without residual stresses, insulating the shoulders from impacts.)

Red Line - Medium

General purpose blades, with medium TPI. For cutting both long grain and cross grain solid wood, giving a good finish.

Norton Straight Wheels For Surface Grinding

AVS: Aluminium oxide abrasive used on all ferrous materials including mild steel, carbon steels and wrought irons. CVS: Silicon catbide abrasive used on non-ferrous materials that includes copper, aluminium, stone and cemented carbides. 38A: Sharp, friable aluminium oxide abrasive used for grinding hard, heat sensitive steels. Well suited for cylindrical, surface and internal applications.



(Type 1) In a choice of Medium or Soft.

York? File Belts

Suitable for a wide range of power tools. Aluminum oxide designed for a wide range of materials including metal, steel, aluminium and non-ferrous metals.



20mm Wide x 520mm Long.