Kennedy® Sharpening Stones

Silicon Carbide man-made abrasive with very hard, sharp particles. This makes it ideal for non-ferrous metals, hard surfaces, alloys and cemented carbides. Also used on stone, marble, glass and plastics. A superior abrasive that is able to penetrate and cut quickly with only light pressure being applied.

Square Silicon Carbide

A range of tough general-purpose sharpening stones able to give keen, even cutting edges on all straight edge cutting tools. Consistent and uniform cutting edges ensure fast cutting and longer tool life.

Evolution Saw Blades

Evolution Diamond blades are manufactured to a high specification.
Hardened blade body ensures the blade runs truer for longer.
High concentration of diamond for longevity.

Available in two rim styles hot pressed turbo segmented rim for consistent cutting ability and continuous rim for delicate tile cutting and a clean finish.

Rage 185mm (7 1/4") Diamond Blade

Rage blade specifications:
Diameter: 185mm (7")
Bore: 20mm
Kerf (Thickness): 2.5mm (1/16")
Rim Style: Segmented
Max Speed: 8000RPM

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'A' Shape. Shank Diameter 6mm

Shape A34. Grade: RA46. Diameter: 38mm. Length: 9mm. Max. rpm: 25,000. Weight per 10: 280g.

Henry General Purpose Cleaner - 1200W

Cable rewind/storage system. Triple 3-stage filtration system to hospital standards. High efficiency 'Turboflo' power head. Four wheel 'Tracking' mobility with big wheel stability. Suction: 2450mm. Capacity: 9 litres. Cleaning Range: 23.2m. Size: 340 x 340 x 370mm

Heavy-Duty Hydraulic Hacksaw

KP200
Complete hydraulic system. Infinitely variable saw feed pressure control. Complete electric components with motor protection. Recalculating coolant system. Adjustable material length stop. Clamping device for short ends. Equalising bar for jaws. Nesting fixture for multiple sawing of stacked bars, small rounds and tubing. Material support stand. One saw blade ready for cutting. One set of necessary tools and tool box. One grease gun. Instruction manual and parts list.

Specifications:
90 max.: 200mm.
Capacity: 190 x 200mm.
45 max.: 90mm.
Capacity: 190 x 90mm.
Stroke length: 120mm.
Strokes: 110, 140/min.
Blade size: 350 x 32mm.
Main motor: 4P, 1HP.
Size (L x W x H): 120 x 51 x 79cms.
Weight: 270kg.

York? Cartridge Roll Kit

Spirally wound Aluminium Oxide cloth roll that wears in use, constantly exposing new abrasive. Used for weld flash removal, deburring, blending and polishing applications.

122 Pieces

Contents:
Straight type rolls: 6 - 10 x 38mm P80 and P120, 4 - 13 x 38mm P80 and P120, 12 - 6 x 38mm P80 and P120, 16 - 6 x 25mm P80 and P125, 6 - 10 x 25mm P80 and P120.
Taper type rolls: 6 - 10 x 38mm P80 and 6 - 13 x 38mm P80.
Mandrels:
1 - 3 x 25 x 6mm.
1 - 3 x 19 x 6mm.

Rasta Depressed Centre & Flat Profile Cutting & Grinding Discs

For use with all portable machines. Not to be used for freehand or wet grinding. Type 27 Depressed Centre Portable Grinding Discs. Type 42 Depressed Centre Portable Cut-Off Discs. Type 41 Flat Portable Cut-Off Discs.

Type 41 Flat General Purpose Metal A30T Cutting

For steel/stainless steel. Fast cutting. Long wheel life. Free of iron, sulphur and chlorine. Made of corundum. Box quantity 25.

York High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Zirconium Grade Glass Fibre Backed (For Stainless Steel - Non-Scratch).

180mm Dia x 22mm Bore 8,600 MOS (rpm).

Chicago Pneumatic® Heavy-Duty Air Reciprocating Saw

CP7901
Heavy duty reciprocating saw. Premium tool for all cutting applications.

Specifications:
Sound pressure: 88.3dB(A).
Strokes per minute: 10,000.
Actual air consumption 5.5CFM.
Air inlet: 1/4" NPTF.
Average air consumption 1.4CFM.
Min hose size: 10mm (3/8").
Weight: 0.86kg.
Overall length: 229mm.
Stroke: 10mm (3/8").

Bosch Cordless Drill/Driver

Multiple gears.
Forward/reverse operation.
Electronic.
Auto-Lock.
Softgrip.
Light.

GSR 18VLiN 18V Drill Driver DS - Body Only