3M 734 Wet or Dry? Silicon Carbide Paper

Aggressive fast cutting waterproof silicon carbide paper, for use on paints, lacquers and fillers.

Sheets

Size: (W)230mm x (L)280mm. Available in several grades.

Kennedy® "T" Type Shank Jigsaw Blades

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HSS - Heavy Duty (Pack 5)

Jigsaw Blade (Equivalent to Bosch T318A)
Application: steel 4mm, aluminium 1.5 - 4mm.
Blade: HSS heavy duty, wavy set tooth form.
Tooth pitch: 1.2mm.

Effective length: 100mm.

Pack of 5.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'B' Shape. Shank Diameter 3mm

Shape B103. Grade: RA80. Diameter: 16mm. Length: 5mm. Max. rpm: 61,000. Weight per 10: 40g.

York Grinding Wheels

Vitrified bond for precision grinding. Unaffected by water, acid and oils. All 1,1/4?? bore, supplied with 1??, 7/8??, 3/4??, 5/8?? & 1/2?? bore nylon bushes. Tough general-purpose aluminium oxide which is hard wearing. Used for surface and off hand grinding. Refined aluminium oxide with a faster grinding operation. Suitable for high speed steels, precision grinding and general surface grinding. Silicon carbide, used on low tensile strength materials, non ferrous metals and carbide tool grinding. All York grinding wheels are supplied in a unique storage box, which helps prevent chipping and other accidental damage. Spare cases available on request.

1,1/4" Bore

Canning-Lippert "B" Quality Mop - Open Type (Medium Hardness)

All round mops for finishing steel and pressed brassware, nickel-silver, copper, brass, silver, aluminium chrome and plastics. Also suitable for nickel and chrome deposits. Made up of guaranteed quality all-cotton cloth in multiple sections of 1/2" (13mm) width. Open type mops will splay under pressure to suit irregular surfaces and give a medium polishing pressure. Can be used in conjunction with Lustre, Hyfin, Steelbrite, Scovax, and Satene compositions.



Product Number: 0220-319. Diameter: 10". Width: 1". Weight: 650g.

NiMH Batteries - O-Type

2607335682 9.6V 2.6Ah AL2422DC, AL2425DC, AL2450DV. AL2498FC

3M Roloc? Wheel Products

Designed for use on portable tools and featuring the convenient Roloc+ twist-on, twist-off fixing system.

Clean 'n Strip Disc R

Clean and strip discs designed for pre-weld and post-weld surface cleaning.

Kennedy® Double-Sided Buffing Pads

Twisted 100% wool pads - for fast results on large areas. Pad can be flipped over to use both sides, i.e. one side for first pass - one side for finishing, or just to double the life of the pad. Use with spindle adaptors (available separately). Diameter: 220mm.

3M Stikit® Discs 338U

Aluminium oxide paper. For general purpose sanding. Fre-Cut coating inhibits premature loading to give a longer lasting product, particularly in fine grades. Features the 3M Stikit self-adhesive fastening system to ensure sheets remain firmly attached to Stikit accessories while in use. All general purpose sanding applications by hand or using portable sanding machines.
Use on: Wood, Paint/Lacquer, Fillers, Metal.
Mineral: Aluminium Oxide.
Backing: C-weight Paper.
Coating: Open.
Bond: Resin Over Glue.

DeWalt Impact Wrenches

The DeWALT impact driver has 440Nm of deliverable torque in forward and reverse this higher torque and faster speed help to increase productivity.

Other features include:
Soft grip handle to reduce vibrations and to enhance user comfort
Robust design for increased durability
Standard
1/2 inch ring retainer

Available as:
110v Order Code: DEW-272-2928K.
230v Order Code: DEW-272-2928R

DW292 1/2 ” Drive Heavy Duty Impact Driver

DW292 ½” Impact Driver Specifications:
Max. torque: 440Nm.
Power Input: 710W.
Power Output: 370W.
No Load Speed: 2200rpm.
Impacts per Minute: 2700ipm.
Max. Bolt Diameter: M20.
Bit Holder: 1/2".
Weight: 3.2kg.
Length: 292mm.
Height: 216mm.

Hand/Arm Vibration – Impact: 7.9 m/s².
Uncertainty K 1 (Vibration): 1.5 m/s².
Sound Pressure: 84dB(A).
Uncertainty K 1 (Sound): 2.8dB(A).
Acoustic Pressure: 95dB(A).
Uncertainty K 2 (Sound): 2.8dB(A).