Bosch Sabre Saw Blades

Application: thin sheet metal 1.5 - 4mm, pipes and profiles 5 - 100mm.
Tooth set: Bi-metal, side set and milled.
Length: 150mm.
Pitch: 1.4.
Product No. S922EF.

For Metal (Pack 5)

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Recessed hub design for maximum access in tight corners.

All wheels are supplied individually. (Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s).

6mm Shank

80mm Dia x 20mm Height 7,700 MOS (rpm)

Norton Straight Wheels For Surface Grinding

AVS: Aluminium oxide abrasive used on all ferrous materials including mild steel, carbon steels and wrought irons. CVS: Silicon catbide abrasive used on non-ferrous materials that includes copper, aluminium, stone and cemented carbides. 38A: Sharp, friable aluminium oxide abrasive used for grinding hard, heat sensitive steels. Well suited for cylindrical, surface and internal applications.



(Type 1) In a choice of Medium or Soft.

Hermes Aluminium Oxide Rolls

Available in a choice of Medium or Heavy Duty and in several grades. Roll size: 115mm x 50 Metres.

Heavy Duty

Aluminium oxide paper for sanding wood and metal.

Kennedy® Jigsaw Blades

Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting in some metals lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw baseplate reducing the gap around the blade and reducing the splinter area. Another technique is to score a guide line on the wood creating a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.

Two Hole Type Suitable for old style Makita. HCS - Medium Duty (Pack 5)

Capacities: Wood - 50.0mm, Plastics 30.0mm. Tooth pitch: 4.0. Effective length: 65mm. Reversible for tight corners. Tapered & ground teeth.

Kennedy® Flexible Extension

The extended flexible nozzle can be bent into any position to allow you to direct the air flow to exactly the area you require it in.
Suitable for use with standard and plastic blow guns.

Flexovit Grinding Wheels

WA: Pure and refined aluminium oxide with good cool cutting characteristics and a good speed of cut. For high speed steels, precision grinding operations and general surface grinding.

Type 1, Plain

Osaki™ Hot Glue Gun

A general purpose adhesive which can be used with many different materials such as paper, card, wood, cork, leather, fabrics, plastics, PVC and ceramics. To suit Osaki GG55E glue gun. Also suitable for use in most other glue guns that will accept 11mm sticks. Stick size: 11mm diameter x 150mm length.

Osaki Glue Sticks

York™ Backing Pad

To suit scrim backed surface conditioning discs. M14 female thread. Size: 100mm x M14.

Kobe™ 10mm Straight Air Drill

DS4510L
10mm Jacobs chuck, stall-resistant, safety lever throttle, high performance, planetary gearing.24 spindle thread.

Specifications:
Air inlet thread: 1/4" NPT.
Chuck capacity: 10mm.
Spindle thread: 3/8" - 24.
Minimum air hose size (ID): 3/8"(10mm).
Air pressure: 90PSI/6.3Bar.
Air consumption: 4CFM* (144 ltr/min).
Sound pressure level: 78 dB(A).
Sound power level: 96 dB(A).
Vibration level: 2.5 m/s2.
Overall length: 190mm.

*Based on a 15 second cycle per minute average use.