Kennedy® 3 Pin Plugs For Indoor Use

Male 3 pin plugs rated to 13A. Resilient nylon, white (office/domestic type) or shatterproof rubber. Conform to BS 1363:Part 1:1995.

York? Felt Bobs

York Felt Bobs are made of pure wool in a variety of sizes, shapes. The mandrels are exactly centered for true-running operation. Suitable for product finishing/polishing with finishing/polishing compounds

Felt Stick

Kennedy® Aluminium Oxide Cloth

Superflex Aluminium Oxide is resin bonded over resin on a very flexible J-weight blue twill cloth. Moisture resistant and electrostatically coated for polishing flat and contoured surfaces of most materials.

Rolls

Roll size: (W)25mm x (L)50 Metres. Available in several grades.

3M 255P Hookit™ Discs

Finishing product coated onto a film backing for consistent finishing. Aluminium oxide with an anti-load coating.

Hole Pattern: 600A. 6 Hole.

Diameter: 150mm.

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Ball Nosed

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

York? Mandrels

For use with Cartridge Rolls. This steel adaptor is used to secure and hold both tapered and parallel sided cartridge rolls to air grinders or electric drills. This holder is used by sliding the cartridge roll onto the mandrel pilot until the bottom of the abrasive touches the threaded steel area. Simply screw the cartridge roll onto the threads to secure. Your mandrel should be at least 13mm longer than your cartridge roll.

Engis Lapping Sticks

Length 150mm.

Hardwood

3M 734 Wet or Dry? Silicon Carbide Paper

Aggressive fast cutting waterproof silicon carbide paper, for use on paints, lacquers and fillers.

Sheets

Size: (W)230mm x (L)280mm. Available in several grades.

235mm (9") Circular Saw

Max. Cut at 90: 85mm. Max. Cut at 45: 64mm. Blade Diameter: 235mm. Bore Diameter: 30mm. Input Wattage: 1,550w. No Load Speed: 4,500rpm. Net Weight 7.6kg. Accessories: carbide-tipped saw blade, rip fence (guide rule), hex wrench. Weight 7.6kg. Available in 110V and 240V.

5903RK

3M Aluminium Zirconia Fibre Discs

581C
A fit for purpose fibre disc for heavy, medium and light grinding applications. Good performance and a consistent quality finish. High performance alumina zirconia (AZ) mineral bonded to a vulcanized fibre backing. Conveniently packaged with 50 discs on a re-usable disc-holder clamping system, for easy storage and retention of disc shape and form. Good performance on stainless and mild steel as well as other ferrous and non-ferrous materials. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

178mm Diameter x 22mm Bore (Max 7,000rpm)