Norton Tool and Cutter Wheels

For other sizes and styles, please contact your local branch for details.

Type 1, Plain

DIWA - Submersible Pumps

Submersible pumps for dirty water, drainage and sewage.
Body made from AISI 304 stainless steel.

Power supply: 230V/50Hz/1Ph.
Temperature of pumped liquid: to 50C.
Maximum immersion depth: 7m.
Free passage: up to 8mm.
10mtr. power cable.
*Type SG are supplied without float switch for manual operation.

Applications
Residential-waste water.
Light Industry-waste water.
(DIWA GT version with fixed vertical float switch system and
three-phase models are also available.)

DIWA

Kennedy® Router Cutters

With ball bearing guide. For edge mould on coving, picture frames, etc. Self guiding with ball bearing.

Two Flute Cove Bits

SIP Airmate Oil Lubricated Compressors

Oil lubricated for longer life, featuring heavy duty pump, cast iron barrel, industrial quality air filter, heavy duty non-return valves and twin threaded outlets and gauges. Tough plastic casing with integral handle providing protection and manoeuvrability. They run from a standard 230V domestic supply, making them ideal for DIY or trade users. The automatic stop/start control, pressure regulator and gauge make them safe and convenient to use. Efficient cooling system. Tanks conform to full EC directives. Compact in design, easy to store and ideal for powering: Air Brushes, Lower/Duster Guns, Air Caulking Guns, Air Degreasing Guns, Air Grease Guns, Inflating Guns, Air Nailer/Staplers, Air Riveters, Spray Guns etc.

Airmate TN 3/50-D

06242
Oil lubricated. 2.5HP induction motor, 230V, 50Hz (13amp) supply.
50 litre air receiver.
Piston displacement 9.5CFM, max. pressure 8 bar.

Kennedy® Wire Wheels & Brushes

Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.

Circular Brushes - Plain Bore

Suitable for removal of rust, paint and dirt from heavily covered parts. Side plates supplied separately.

Kennedy® Velcro-Backed Sanding Discs

No spanners required to change discs. 100% of sanding disc can be used, material removal rate is therefore increased. Can be repeatedly removed and re-applied again and again. Unaffected by dust or moisture. Aluminium oxide abrasive "resin-bonded over resin" to Velcro backed paper suitable for wood, plastics, ceramics etc.

Plain (No Holes)

Diameter: 125mm.

Flexovit Non-Reinforced Toolroom Cutting Wheels

Thin slitting discs in aluminium oxide grain for all toolroom cutting-off applications. Hard grade.

Kennedy® Wire Wheels & Brushes

Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.

Cup Brushes Twisted Knot - Threaded Bore

For fast and heavy duty cleaning. The support ring prevents excessive spreading. For removal of rust, paint and scale on large surfaces. 50 SWG

Kennedy® Depressed Centre and Flat Reinforced Grinding Discs

All Kennedy Depressed Centre and Flat Reinforced Cutting wheels now carry the "oSa" (The Organisation for the Safety of Abrasives) mark of approval. "oSa" is an association of the world's leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. "oSa" marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

Type 41 Flat Reinforced Cutting

For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatability. Not to be used for wet cutting.
Grade A24 - For general purpose cutting on metals.
Grade C24 - For general purpose cutting on stone.

Random Orbital Sander - 150mm Elite Series

28508
Features an alloy steel curved-throttle lever with built-in wrist support, 3M™ gripping material molded into the interchangeable comfort grip, conveniently located speed control dial, and internal muffler.
3M™ Hookit™ Clean Sanding Disc Pad included.
Benefits and features:
Precision balanced for smooth operation.
Easily attaches to your existing central vacuum system for efficient dust evacuation.
Newly designed wrist rest for more support.
Recessed level eliminates pinch points.
Composite cover to prevent crack housings.
Airflow Rate SCFM (LPM): 17 (481).
Dimensions (H x L): 92.6 x 238mm.
Max RPM: 12000.
Motor: 0.28hp.
Orbit dia.: 3/16" (5mm).
Tool dia.: 6" (152mm).
Weight: 0.896kg.