Kennedy® Sharpening Stones

Silicon Carbide man-made abrasive with very hard, sharp particles. This makes it ideal for non-ferrous metals, hard surfaces, alloys and cemented carbides. Also used on stone, marble, glass and plastics. A superior abrasive that is able to penetrate and cut quickly with only light pressure being applied.

3 Square Silicon Carbide

A range of tough general-purpose sharpening stones able to give keen, even cutting edges on all straight edge cutting tools. Consistent and uniform cutting edges ensure fast cutting and longer tool life.

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Zirconium Grade Glass Fibre Backed (For Stainless Steel - Non-Scratch).

100mm Dia x 16mm Bore 15,300 MOS (rpm).

Kennedy® Flexible Backing Pads

Suitable for use with all portable and air disc sanders. Recommended for use with Kennedy® abrasive discs.

DOC- Submersible Pumps

Submersible pumps for dirty water, drainage and sewage.
Versatile, corrosion-resistant and compact.
A DOC 7VX version with Vortex impeller and the DOC GT with fixed vertical float switch system are also available.
Body made from AISI 304 stainless steel.

Power supply: 230V/50Hz/1Ph.
Temperature of pumped liquid: to 40°C.
Maximum immersion depth: 5.0m.
Free passage: up to 10.0mm.
10mtr. power cable.
*Type SG are supplied without float switch for manual operation.

Applications:
Emptying of residential sump pits, rainwater tanks or laundry drainage.
Garden and lawn irrigation, with suction from rainwater tanks.
Emergency draining of flooded basements and garages.
Transfer of water from tanks, cisterns and swimming pools.

DOC

Chrome Plate Switch

Polished chrome finish, 2 gang, 2 way switch. 10 amp rated. British made.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

60mm Dia x 40mm Height 10,200 MOS (rpm)

Mini belt Sander 20mm - 16,000RPM

Suitable for flat, concave and convex surfaces.
Sanding arm can be rotate to any angle - improved access in confined spaces, saves space when storing the tool.
Spare belt and hex wrench included.
Ergonomic and comfortable rubber grip for reduces vibration.
Low profile teasing throttle for precise speed control.
Directional rear exhaust.

ACTION SHORT:
Sanding arm can be rotated to any angle.
Adjustable air (speed) regulator.
Lever operated throttle with safety clip.
Quick and easy to change belt.



MODEL NUMBER R5238
BELT SIZE 20 x 520mm (4⁄5 x 20.5?)
FREE SPEED 16,000 rpm
RECOMMENDED AIR PRESSURE 6.2bar (90psi)
AIR CONSUMPTION 4cfm (113L/min)
AIR INLET THREAD 1/4? NPT
MINIMUM AIR HOSE SIZE (ID) 10mm (3/8?)
NOISE LEVEL? 84dBA
SOUND POWER LEVEL? 92dBA
VIBRATION LEVEL # 0.8m/s2
FOLDED LENGTH 255mm
OPEN LENGTH 420mm
NET WEIGHT 1.6kg
? Per EN ISO 15744:2002.
# Per EN 28927-3.

Kennedy® Portable Sander Belts

Resin Bond Aluminium Oxide Sanding Belts are designed for industrial applications. Durability combined with flexibility ensures a long life and first class performance. Suitable for wood and metal work.



100mm (4") Wide x 610mm (24") Long.

Kobe™ 180mm Angle Air Polisher

PA1825
For high performance buffing & polishing on bodywork and paintwork. Built-in regulator for consistent performance. Can be used with compounding heads & polishing sponges.

Specifications:
1/4" NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
Spindle thread 5/8" - 11.
Overall length: 380mm.
Pad size: 180mm.

*Based on a 15 second cycle per minute average use.

Rotabroach Mini Cutters

For perfect holes in sheet metal, pipes & plastic. Cut clean, burr-free holes in seconds with new Roatabroach Mini-Cutters, the professional solution to holemaking in sheet metal, pipes and plastics. Mini-Cutters produce holes by removing a 'disc' of metal and have precision ground teeth and flutes to rapidly remove waste material, so they are fast, smooth and highly accurate. Now they come with a new and more aggressive tooth geometry to give high higher performance and longer cutting life on stainless steel and other difficult materials. No toolbox is complete without Mini-Cutters for clean, precise and effortless holecutting every time. Over 3 times faster than twist drills Mini-Cutters have multiple teeth and an annular
cutting action with no 'dead centre' area as with a twist drill. It means that less pressure is required to make the hole, so there is less risk of deforming sheet metal. This highly efficient cutting action also ensures minimal burring on breakthrough, reducing or completely eliminating the need for additional finishing work. Last up to 300 times longer than hole saws Holesaws have stamped teeth which only remove
small particles of metal with each revolution whereas Mini-Cutters are precision ground cutting instruments which slice their way through sheet metal without leaving burrs or jagged edges. Because they are made from M2 High Speed Steel,
they retain their sharpness to give a longer, more reliable cutting life over thousands of holes.