York Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.
N.B. - 3mm Shank

Pointed Tree

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

York? Sanding Bands

Spiral wound with tear resistant backing fabric. For grinding and finishing edges, profiles, welded joints etc. For use with power tools. Aluminium Oxide for use on most metals. Available in several sizes.

Aluminium Oxide Sanding Bands

Size: (Dia)19mm x (W)25mm.

Kennedy® Sharpening Stones

Aluminium Oxide man-made abrasive which is extremely tough enabling high speed penetration of high tensile materials without causing excessive fracturing. This resistance to fracturing makes it a versatile material suitable for general sharpening and honing applications.

Square Aluminium Oxide

A range of tough general-purpose sharpening stones able to give keen, even cutting edges on all straight edge cutting tools. Consistent and uniform cutting edges ensure fast cutting and longer tool life.

York? Sanding Bands

Spiral wound with tear resistant backing fabric. For grinding and finishing edges, profiles, welded joints etc. For use with power tools. Aluminium Oxide for use on most metals. Available in several sizes.

Aluminium Oxide Sanding Bands

Size: (Dia)100mm x (W)40mm.

York? Nylon Finishing Wheels

Made from high quality nylon, which is both flexible, durable and does not clog as easily as standard abrasive. 6mm shank diameter. Alternate flaps of abrasive and interleaved with a versatile high quality nylon. Ideal for: matching/blending a finish, light deburring, decorative/cosmetic applications, on most materials, rust removal and blending. Available in a choice of Coarse, Medium, Fine and Very Fine Density Grades and in sizes 50 x 25mm, 50 x 50mm, 76 x 50mm and 100 x 50mm.

Nylon Finishing Wheel 50 x 25mm

Ideal for: Matching/blending a finish, light deburring, decorative/cosmetic applications.

Kobe™ Generators

The Kobe™ GPP230 frame mounted petrol generator can deliver a 2.3kVA 110V or 220V supply for up to nine hours on a single tank of fuel; making it ideal for builders, contractors, mobile caterers, etc. for powering lighting, freezers, power tools, water pumps and
other electrical items.

Features include:
Brushless alternator producing:
2.3kVA/2.3kW maximum power,
2kVA/2kW continuous power.
One 220V AC and one 110V AC outlet.
Voltmeter.
Circuit breakers.
12 litre fuel tank with fuel level indicator.
Approximately 9 hours running time.
4 stroke, 6.0hp, OHV, single cylinder, air cooled engine that runs on unleaded petrol.
Low oil alert and shutdown.
Recoil starter.

GPP230 2.3kVA Portable Petrol Generator Dual Voltage 110/220V

GPP230 Specification:
Fuel Tank Capacity: 12L.
Fuel Type: Unleaded petrol.
Oil Capacity: 0.6L.
AC Output: 220V/110V 60Hz Single phase.
Continuous Power: 2kVA/2kW.
Maximum Power: 2.3kVA/2.3kW.
Engine Type: 6.0hp, 4 - stroke, OHV, single cylinder, air cooled, 3,000rpm, 171cc displacement.
Alternator Type: Brushless.
Sound Power Level: 94dBA.
Sound Pressure: 72.2dBA.
Running Time: Approx. 9 hours @ 75% load.
Net Dimensions: 425x515x430mm (HxWxD).
Net Weight: 39kg.

It is advisable to properly earth (ground) the Generator before using it. Use a 1.2mm2 copper wire attached at one end to the Generator?s earth connection point and the other end connected to an earthing rod set in the ground.

This will also dissipate the static electricity which will build up in the Generator during use.

Please note:
The earth wire and rod are not supplied with the Generators. An earthing rod kit is available separately: Order Code: KBE-280-9000K.

York Grinding Wheels

Vitrified bond for precision grinding. Unaffected by water, acid and oils. All 1,1/4?? bore, supplied with 1??, 7/8??, 3/4??, 5/8?? & 1/2?? bore nylon bushes. Tough general-purpose aluminium oxide which is hard wearing. Used for surface and off hand grinding. Refined aluminium oxide with a faster grinding operation. Suitable for high speed steels, precision grinding and general surface grinding. Silicon carbide, used on low tensile strength materials, non ferrous metals and carbide tool grinding. All York grinding wheels are supplied in a unique storage box, which helps prevent chipping and other accidental damage. Spare cases available on request.

1,1/4" Bore

3M 255P Hookit™ Discs

Finishing product coated onto a film backing for consistent finishing. Aluminium oxide with an anti-load coating.

Hole Pattern: 500A. 5 Hole

Diameter: 125mm.

3M Scotch-Brite? Clean & Finish Rolls

A Scotch-Brite roll designed for light cleaning, finishing and deburring operations. Available in very fine grades for even finer finishes. The roll can be easily torn to convenient lengths. Available in 10M rolls in a choice of 100mm, 125 and 150mm widths.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 3mm

Shape W184. Grade: RA80. Diameter: 13mm. Length: 10mm. Max. rpm: 70,000. Weight per 10: 50g.