Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Kennedy® Sharpening Stones

Aluminium Oxide man-made abrasive which is extremely tough enabling high speed penetration of high tensile materials without causing excessive fracturing. This resistance to fracturing makes it a versatile material suitable for general sharpening and honing applications.

Square Aluminium Oxide

A range of tough general-purpose sharpening stones able to give keen, even cutting edges on all straight edge cutting tools. Consistent and uniform cutting edges ensure fast cutting and longer tool life.

York? Flat Reinforced Cutting Discs

Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatability. Not to be used for wet cutting.

Type 41

Grade C24. For use on stone and non-ferrous materials.

Speed Ratches

SR500
Ball type retainer, disc type reversing action, compact, lightweight design, ideal for automotive work.

Specifications:
13mm bolt capacity.
1/4?? NPT air inlet thread for 10mm air hose.
150rpm free speed.
90psi air pressure.
4CFM* air consumption,
50ft/lbs torque.
Front exhaust.
Overall length: 255mm.

*Based on a 15 second cycle per minute average use.

Kobe Air Ratchet Speed Wrench (1/2?? Square Drive)

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

3mm Shank

30mm Dia x 10mm Height 20,400 MOS (rpm)

York? Flexible Abrasives

Abrasive covered foam for general-purpose sanding on wood.

Chamfered Sanding Block

Semi-flexible abrasive coated sponge. The different surface angles allow awkwardly contoured wooden surfaces to be easily sanded. Available in two different grades.

Hitachi Angle Grinders

Powerful 840W motor
High overload durability
Compact design
Side mounted switch
Two position side handle

G12SN 115mm (4 1/2”) Angle Grinder

G12SN Angle Grinder specification:
Disc Diameter: 115mm (4-1/2").
Bore Diameter: 22.23mm (7/8").
No-Load Speed: 10,000/min.
Overall Length: 259mm.
Power Input: 840W.
Weight: 1.6kg.

Supplied with:
Side Handle, Depressed Centre Wheel, pin spanner.

Dronco Flap Discs

Used for descaling and derusting of stainless steel, steel, aluminium and non-ferrous metal. Preparation and finishing of welding seams, preparing of painted surfaces and polishing of stainless steel. For use with a grinder.

Polishing Flap Discs

Available in 2 sizes: 115mm x 22mm and 125mm x 22mm.

Hermes Abrasive Sheets and Rolls

A flexible aluminium oxide cloth superior to standard emery blue twill cloth in cut and performance. For machine and hand use on all metals. Ideal for maintenance and repair operations.

RB346 J-Flex Aluminium Oxide Cloth Roll

Aluminium oxide resinoid, cloth backed, X weight for workshop use.

K2 Car Pressure Washer

240V universal motor. Standard wash brush, trigger gun and foam nozzle.
Power: 1.4kw.
Max rated pressure: 110bar.
Max. water flow rate: 360ltr/hr.

K2 Compact Car Pressure Washer

Hose length: 4m.