York? Sanding Bands

Spiral wound with tear resistant backing fabric. For grinding and finishing edges, profiles, welded joints etc. For use with power tools. Aluminium Oxide for use on most metals. Available in several sizes.

Aluminium Oxide Sanding Bands

Size: (Dia)10mm x (W)20mm.

York? Diamond Coated Burrs

3mm shank. Overall length 45mm. Diamond grip mesh is 120/140. Recommended operating speeds 15,000 30,000 RPM. Suitable for precision grinding of carbide, gems, ceramics, tough alloys, cermets, tool steels etc.

Cylindrical

Kennedy® Velcro-Backed Sanding Discs

No spanners required to change discs. 100% of sanding disc can be used, material removal rate is therefore increased. Can be repeatedly removed and re-applied again and again. Unaffected by dust or moisture. Aluminium oxide abrasive "resin-bonded over resin" to Velcro backed paper suitable for wood, plastics, ceramics etc.

Plain (No Holes)

Diameter: 115mm.

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Long Series

Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.

Bosch 9" Angle Grinders

GWS 22-230
Powerful 2200 W Champion motor for fast work progress. Low weight for optimum handling. Twist-proof protective guard - reliably protects the user if the grinding disc breaks. Restart protection prevents the tool from automatically restarting after a power cut. Armoured coils protect the motor against sharp grinding dust that ensure long lifetime. Double-sealed ball bearings and the especially sturdy gearing guarantee a long lifetime.

Specifications:
Rated power input: 2200W.
No-load speed: 6500rpm
Grinding spindle thread: M14.
Main handle: straight.
Disc diameter: 230mm.
Weight: 5.2kg.
Disc supplied separately.

Available as 240V or 110V.

Bosch 9" Anti-Vibration Angle Grinders

GWS 22-230LVI
Unbeatable light! 20% less weight with 100% power. KickBack stop for maximum user protection in case of a disc jam. Soft start is convenient and limits the starting current. Burst proof quick adjustable guard for superior convenience and protection. New vibration control side handle with soft pads - the perfect grip. New 2200W low weight Champion motor. Softgrip for better handling. Restart protection for superior user protection if switch is on after power interuption. Vibration control main handle double damping.

Specifications:
Rated power: 2200W.
No load speed: 6500rpm.
Disc diameter: 230mm.
Weight: 5.3kg.
Disk supplied separately.

Available in 240V and 110V.

Replacement Filter Bags Charles/Edward Vacuum Cleaners

NVM2B supplied in packs of 10.

3M Scotch-Brite Deburring Wheels DB-WL

Available in three different grades to cope with a range of deburring applications. Continuously exposes abrasive to the workpiece to produce a consistent finish throughout the life of the product. Will not undercut, gouge, or distort the workpiece. Silicon carbide, convolutely wound. Suitable for use on all metals.

Kennedy® Economy Emery Cloth

The emery abrasive particles are bonded by a high strength glue to a flexible J-weight blue twill backing cloth. The backing cloth allows the abrasive sheet to conform to the shape of the item being worked on, ensuring the abrasive action is always where you require it. Suitable for general-purpose, light duty workshop use.

Rolls

Roll size: (W)38mm x (L)50 Metres. Available in several grades.

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Ball Nosed

Cut 3 - Rapid Cut
For use on softer non-ferrous and plastic materials i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.