Kennedy® Wet or Dry Silicon Carbide Paper

Silicon Carbide is waterproof-resin bonded to paper suitable for wet and dry production polishing and finishing of a wide range of materials including metals, plastics, paintwork, ceramics etc.

Wet or Dry Paper Sheets

Size: (W)230mm x (L)280mm. Available in several grades.

Karcher K5 Compact Pressure Washer

Water cooled motor. Best trigger gun. Quick connect. Water suction.
Power: 2.1kw.
Max rated pressure: 145bar.
Max. water flow rate: 500ltr/hr.
Hose length: 8m.

York? Nylon Finishing Wheels

Made from high quality nylon, which is both flexible, durable and does not clog as easily as standard abrasive. 6mm shank diameter. Alternate flaps of abrasive and interleaved with a versatile high quality nylon. Ideal for: matching/blending a finish, light deburring, decorative/cosmetic applications, on most materials, rust removal and blending. Available in a choice of Coarse, Medium, Fine and Very Fine Density Grades and in sizes 50 x 25mm, 50 x 50mm, 76 x 50mm and 100 x 50mm.

Nylon Finishing Wheel 76 x 50mm

Ideal for: Matching/blending a finish, light deburring, decorative/cosmetic applications.

York? Linisher Belts

York sanding belts to suit a wide range of power tools. Aluminum oxide designed for a wide range of materials including metal, steel, aluminium and non-ferrous metals.



50mm (2") Wide x 1065mm (42") Long.

338U Plain Stikit™ Sheets

Abrasive C paper backed sheets with a special self adhesive system that ensures the product remains firmly in place whilst in use but is easy to apply and quick to remove. Ideal for intermediate and final sanding on lacquered hard and soft woods, paints lacquers, primers, solid surface materials and plastics.



Plain (no holes)

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Zirconium Grade Aluminium Backed (For Stainless Steel)

100mm Dia x 16mm Bore 15,300 MOS (rpm).

Kobe 13mm Heavy-Duty Pistol Air Drill

DP513
13mm Jacobs chuck.
High reduction gearbox, high torque, with side handle,.
1/2 HP motor.
1/4" NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
3/8" - 24 spindle thread.
Overall length 180mm.

*Based on a 15 second cycle per minute average use.

Bosch 355mm (14") Professional Cut-Off Saw

Extremely robust lever and spring combination for the highest workloads. Powerful 2000W motor and user friendly quick clamping mechanism with continuously variable mitre angle setting up to 45°. Vertical D-handle for ergonomic working. Integrated handle for easy transport.

GCO 2000 Cut-Off Saw

Specifications:
Cutting capacities: rectangle 180 x 85mm, square 110 x 110 mm, L-profile 130 x 130mm.
No-load speed 3500rpm.
Cutting disc dia: 355mm.
Cutting disc bore: 25.4mm.
Weight: 18kg.

Available in 240V and 110V.

Hitachi NiCd Batteries

Least expensive cell technology. Has the least temperature sensitivity of the three battery types. A large number of charge cycles is possible.

EB9S 9.6V Battery 1.4AH NiCd

Charger compatibility: UC35SFL, UC18YRL/J0 and UC24FYA.
N.B. Picture is for illustrative purposes only. Actual product may vary in appearance.

York? Cartridge Rolls

Spirally wound Aluminium Oxide cloth rolls that wear in use constantly exposing new abrasive. Used for weld flash removal, deburring, blending and polishing applications. Available in two types. A steel mandrel must be used to secure the abrasive to the tool.

Straight Type